怎樣修改instance number?

lu407

修改instance number對于安裝系統和mc來說有一定作用。。再說因?yàn)樵��?jīng)的case印象深刻。。

1.  Extract a configuration template from the current ioscan output.
         Execute the following command:

         # ioscan -f | grep -e INTERFACE -e DEVICE | \
         grep -v target | \
         awk '{print $3, $1, $2}' > /infile

     2.  Edit /infile and change the ext_bus and lan instances as desired.
         No class is allowed to get more than one line for the same instance!

     3.  Bring down the system gracefully to run level 1.

         # init 1

     4.  Apply the ioconfig change:

         # /sbin/ioinit -f /infile -r

         The system will reboot immediately if the change is successful.
         Warnings like 'Input is identical to kernel' can be ignored.

         If unsuccessful, the most likely error to happen is:
         "ioinit: Instance number X already exists for class XXX"

         The problem is that your desired instance assignment conflicts with
         an existing instance number.

     5.  Once the system reboots, verify that all the instance numbers
         were changed as expected. It may be necessary to re-import volume
         groups to ensure that /etc/lvmtab contains the correct
         entries. The lan configuration may need to be changed also.

[ 本帖最后由 lu407 于 2006-6-2 01:18 編輯 ]

czyf2001

修改實例個數？
是在你的數據庫安裝好了吧？
可以通過srvctl 來實現的，你參考：
http://dev.csdn.net/article/67/67101.shtm
希望對你有用！

lu407

汗。�？磥�(lái)兄弟們對這個不是很熟悉
修改instance number的作用是用來修改設備文件名。。比如一個disk本來叫c0t6d0通過修改使之變成c2t6d0。。
因?yàn)閕nstance number本來是系統自身分配的。。很多情況下要求雙機設備文件名一致，可以通過以上方法修改。。
當然這是最簡單的一種。。

lwq315

頂！言簡意賅！收藏！

lu407

看來以后共享文檔還是寫成中文的比較好。。

Lunixer

哈哈，此“實例”非彼“實例”�。�
一個是HP設備的稱呼
一個是Oracle的叫法！
呵呵