- 論壇徽章:
- 0
|
按以前的做法，一般是luxadm remove_device 以后把新盤加上去系統就可以識別了，但是取出壞盤后，新盤加上去卻無法識別，這個是不是A5200的solt3出現問題了？做了devfsadm 和drvconfig -C,
luxadm insert_device 都沒有發現新的設備。luxadm display -v S輸出如下：
SENA
DISK STATUS
SLOT FRONT DISKS (Node WWN) REAR DISKS (Node WWN)
0 On (O.K.) 20000004cf8e38b5 On (O.K.) 20000004cf8e3ede
1 On (O.K.) 20000004cf8e402c On (O.K.) 20000004cf8e3405
2 On (O.K.) 20000004cf8e38d8 On (O.K.) 20000004cf8e33ab
3 Off(Bypassed:AB) On (O.K.) 20000004cf8e34b1
4 On (O.K.) 20000004cf8e381d On (O.K.) 20000004cf8e3903
5 On (O.K.) 20000004cf8e3f50 On (O.K.) 20000004cf8e3a60
6 On (O.K.) 20000004cf8e3f4f On (O.K.) 20000004cf8e380e
7 On (O.K.) 20000004cf8e3471 On (O.K.) 20000004cf8e3fa7
8 On (O.K.) 20000004cf8e3fe9 On (O.K.) 20000004cf8e4054
9 On (O.K.) 20000004cf8e4046 On (O.K.) 20000004cf8e33e9
10 On (O.K.) 20000004cf8e3a8e On (O.K.) 20000004cf8e39ad
SUBSYSTEM STATUS
FW Revision:1.09 Box ID:3 Node WWN:50800200000ede68 Enclosure Name:S
Power Supplies (0,2 in front, 1 in rear)
0 O.K.(rev.-02) 1 O.K.(rev.-02) 2 O.K.(rev.-02)
Fans (0 in front, 1 in rear)
0 O.K.(rev.-04) 1 O.K.(rev.-00)
ESI Interface board(IB) (A top, B bottom)
A: O.K.(rev.-04)
GBIC module (1 on left, 0 on right in IB)
0 Failed(mod.-05): Not receiving a signal
1 O.K.(mod.-05)
B: O.K.(rev.-04)
GBIC module (1 on left, 0 on right in IB)
0 O.K.(mod.-05)
1 O.K.(mod.-05)
Disk backplane (0 in front, 1 in rear) |
|
免費注冊
發表于 2006-05-30 12:43
發表于 2006-05-31 14:42