第一次使用make，出現(xiàn)這個錯誤，請大家?guī)兔Α?/a>

ahhui

# make Makefile
UX:make: ERROR: Must be a separator on rules line 20 (bu39).

系統(tǒng)：Unixware 7.1.1
GCC：2.8.0

我的Makefile內(nèi)容如下：

-------------

# Uncomment the one corresponding with your system

#ZZZ=Z80_PORTS="\"$(HOME)/.Z80_ports\""
ZZZ=Z80_PORTS="\"./.Z80_ports\""

#SYSTEM=DOS
SYSTEM=UNIX
DEFINES=-DFURTHER_HARDWARE
#DEFINES=-DFURTHER_HARDWARE -DZ80_CTC

# set the appropriate install directories in your system

MAN_DIR=/usr/local/man
BIN_DIR=/usr/local/bin

#--------- You shouldn't need to change anything under this line ---------------

HW=hardware/hard.a
ifeq (UNIX, $(SYSTEM))
RM=rm -f
ASM=z80-asm
MONI=z80-mon
else
RM=del
ASM=z80-asm.exe
MONI=z80-mon.exe
endif

CFLAGS=-O2 -Wall -D$(ZZZ) -D$(SYSTEM) $(DEFINES) -W -Wstrict-prototypes \
       -Wno-parentheses -fomit-frame-pointer -malign-functions=0
LDFLAGS=

all:
        cd hardware; $(MAKE) hard.a
        make $(ASM)
        make $(MONI)
        cd hardware; $(MAKE)

clean:
        $(RM) *.o
        $(RM) $(ASM)
        $(RM) $(MONI)
        $(RM) asm.a
        $(RM) cpu.a
        cd hardware; make clean

install:
        chmod a+rx $(ASM) $(MONI); cp -p $(ASM) $(MONI) $(BIN_DIR)
        chmod a+r doc/z80-*.1; cp -p doc/z80-*.1 $(MAN_DIR)/man1
        chmod a+r doc/z80-*.3; cp -p doc/z80-*.3 $(MAN_DIR)/man3
        chmod a+r doc/z80-*.5; cp -p doc/z80-*.5 $(MAN_DIR)/man5

z80-mon.o: z80-mon.c z80-cpu.h asm.h console.h console_token regs.h regs_token \
           execute.h execute_token file.h memory.h interrupt.h help_layout \
           mini-display.h decode.h keyboard.h ports.h hash.h hardware/z80-ctc.h

z80-asm.o: z80-asm.c hash.h asm.h file.h

z80-cpu.o: z80-global z80-cpu.c hardware/quartz.h hardware/z80-ctc.h

decode.o: decode.c z80-cpu.h z80-mon.h decode-table.h execute.h execute_token \
          regs_token memory.h hardware/daisy_chain.h

instr.o: instr.c instr_token z80-cpu.h

file.o: file.c file.h

regs.o: regs.c regs_token z80-cpu.h

compile.o: compile.c asm.h execute_token regs.h regs_token

hash.o: hash.c asm.h

asm.o: asm.c asm_interface.h instr.h z80-cpu.h hash.h compile.h execute_token \
       regs.h regs_token

console.o: console.c console_token

decode-table.o: decode-table.c z80-cpu.h execute.h execute_token regs.h regs_token

execute.o: execute.c z80-cpu.h execute_token regs.h regs_token decode.h asm.h \
           memory.h ports.h hash.h

ports.o: ports.c z80-cpu.h mini-display.h asm_interface.h keyboard.h memory.h \
         hardware/z80-ctc.h

memory.o: memory.c z80-cpu.h

interrupt.o: interrupt.c z80-cpu.h decode.h z80-mon.h hardware/daisy_chain.h

mini-display.o: mini-display.c console.h console_token

keyboard.o: keyboard.c console.h

asm.a: z80-cpu.o asm.o hash.o compile.o regs.o instr.o interrupt.o file.o \
       mini-display.o keyboard.o
        $(RM) asm.a
        ar rcs asm.a z80-cpu.o asm.o hash.o compile.o regs.o instr.o interrupt.o \
                 mini-display.o keyboard.o file.o

cpu.a: execute.o decode-table.o decode.o memory.o ports.o
        $(RM) cpu.a
        ar rcs cpu.a execute.o decode-table.o decode.o memory.o ports.o


$(ASM): z80-asm.o asm.a $(HW)
        gcc -lc -o $(ASM) z80-asm.o asm.a $(HW)
$(MONI): z80-mon.o cpu.a console.o asm.a $(HW)
        gcc -lc -o $(MONI) z80-mon.o cpu.a console.o asm.a $(HW)

xujunxp

是不是忘了TAB鍵

ahhui

請問TAB鍵怎么用？

xujunxp

好像命令行不能頂格寫，要加個制表符

JohnBull

[quote]原帖由 "xujunxp"]好像命令行不能頂格寫，要加個制表符[/quote 發(fā)表：


去掉“好像”，這個回答就完美了。

xujunxp

版主見笑了，我也是新手，心里沒底，呵呵