SUN主機上識別IBM3584的問題，求救

ff_jxj

SUN v880 系統版本為solaris 9\r\nIBM 3584 磁帶庫，配有10個光纖LTO3磁帶驅動器\r\n\r\n系統能正常識別驅動器，但是無論如何我都無法找到帶庫的機械臂\r\ncfgadm -al也只能看到10個驅動器\r\n\r\n安裝IBM的驅動后（IBMtape.4.1.6.6.bin)，沒任何效果,在/dev/rmt下依然是solaris自動識別的設備(如設備1是0cbn而不是0stcbn).沒有smc文件\r\n\r\n/kernel/drv/st.conf所有項已經全部注釋掉\r\n/usr/kernel/drv/IBMtape.conf 除target 7和15外全開放\r\n\r\n/opt/IBMtape/diags_info 執行顯示一切正常\r\n\r\n安裝networker后使用inquire,也只能搜到10個驅動器\r\n\r\n諸位高手,誰有具體實施案例的,幫幫兄弟\r\n\r\n很緊急,求救

科學球

試試在/etc/system中加入這行\(zhòng)r\nforceload: drv/st\r\n\r\n也許是因內存原因?qū)е聅t驅動程序被系統卸載。\r\n\r\n另外，不知道是使用的哪種備份軟件？如機械手需要備份軟件驅動，那么對應的驅動配置文件也應該加入/etc/system

david5337

SUN上識別到的設備跟IBM會有不一樣的地方；比如，機械手，SUN上不是smc！\r\n嘎嘎，找個SUN工程師幫你們做哦；不需要單獨裝tape drive的驅動程序的啦！

andy_lyb

IBM工程師說自己不會solaris,反正都有借口.....\r\n還有,在solaris下裝IBM的帶庫驅動,生成的機械臂設備文件,確實是smc......

\r\n\r\n誰賣的帶庫誰負責呀。IBM帶庫要連到人家SUN服務器上，IBM當然要負責連上去，并且確認磁帶庫機械手和磁帶機設備可以正常被服務器識別并且控制讀寫。\r\n否則人家就從SUN買帶庫好了，干嘛要買你IBM的？

sun_up

ftp://ftp.software.ibm.com/storage/devdrvr/Solaris/IBMtape.README\r\n\r\nI believe you are using Sun branded HBA. That is Sun design that all of tape drives are always configured with Sun native st driver by the Sun SAN Foundation Software. Follow the instruction to fix the issue in IBMtape.Readme:\r\n\r\n4). Configure with Sun FC HBA\r\n   a) Attach IBM tape devices on the host\r\n   b) Install the appropriate version of Sun HBA driver\r\n   c) Run # cfgadm -al to display the configuration between HBA and the tape device\r\n      Run # cfgadm -c configure device to configure the tape device with the HBA if needed\r\n   d) Install the IBMtape tape driver\r\n   e) Add the following appropriate lines in /etc/driver_aliases\r\n      IBMtape \"scsiclass,01.vIBM.pXXX\"\r\n      IBMtape \"scsiclass,08.vIBM.pXXX\"\r\n\r\n      where 01 is the type of tape drive and 08 is the type of medium changer,\r\n      XXX is the product ID string in the standard inquiry data. In an example, for IBM\r\n      LTO-2 drive with the product ID of ULT3580-TD2, XXX is ULT3580-TD2. The above entry\r\n      needs to be add in the file.\r\n             IBMtape \"scsiclass,01.vIBM.pULT3580-TD2\"\r\n\r\n      A list of the entry for the supported IBM tape devices:\r\n       For the tape drives:\r\n       IBMtape \"scsiclass,01.vIBM.pULT3580-TD1\"\r\n       IBMtape \"scsiclass,01.vIBM.pULTRIUM-TD1\"\r\n       IBMtape \"scsiclass,01.vIBM.pULT3580-TD2\"\r\n       IBMtape \"scsiclass,01.vIBM.pULTRIUM-TD2\"\r\n       IBMtape \"scsiclass,01.vIBM.pULT3580-TD3\"\r\n       IBMtape \"scsiclass,01.vIBM.pULTRIUM-TD3\"\r\n       IBMtape \"scsiclass,01.vIBM.pULT3580-HH3\"\r\n       IBMtape \"scsiclass,01.vIBM.pULTRIUM-HH3\"\r\n       IBMtape \"scsiclass,01.vIBM.pULT3580-TD4\"\r\n       IBMtape \"scsiclass,01.vIBM.pULTRIUM-TD4\"\r\n       IBMtape \"scsiclass,01.vIBM.p03590B1A\"\r\n       IBMtape \"scsiclass,01.vIBM.p03590E1A\"\r\n       IBMtape \"scsiclass,01.vIBM.p03590H1A\"\r\n       IBMtape \"scsiclass,01.vIBM.p03590E11\"\r\n       IBMtape \"scsiclass,01.vIBM.p03590H11\"\r\n       IBMtape \"scsiclass,01.vIBM.p03592J1A\"\r\n       IBMtape \"scsiclass,01.vIBM.p03592E05\"\r\n\r\n       For the medium changers,\r\n       IBMtape \"scsiclass,08.vIBM.p03584L32\"\r\n       IBMtape \"scsiclass,08.vIBM.p03584L22\"\r\n       IBMtape \"scsiclass,08.vIBM.pULT3582-TL\"\r\n       IBMtape \"scsiclass,08.vIBM.pULT3583-TL\"\r\n       IBMtape \"scsiclass,08.vIBM.pULT3581-TA\"\r\n       IBMtape \"scsiclass,08.vIBM.pULT3581-TA2\"\r\n       IBMtape \"scsiclass,08.vIBM.p03590B11\"\r\n       IBMtape \"scsiclass,08.vIBM.p03590E11\"\r\n       IBMtape \"scsiclass,08.vIBM.p03590H11\"\r\n       IBMtape \"scsiclass,08.vIBM.p3576-MTL\"\r\n       IBMtape \"scsiclass,08.vIBM.p3573-TL\"\r\n       IBMtape \"scsiclass,08.vIBM.p3577-TL\"\r\n\r\n       Note:\r\n         The entry is also added running # update_drv command on Solaris 8 (need patch 111804-03),\r\n         Solaris 9 and later version OS. For example,\r\n            # update_drv -av -i \'\"scsiclass,01.vIBM.pULT3580-TD2\"\' IBMtape\r\n\r\n   f) Reboot the system running # reboot -- -r\r\n   g) Run # /opt/IBMtape/tapelist -l to display the configured tape devices information

sun_up

One more thing ...\r\n\r\nThe entries added in driver_aliases file will be automatic removed by the system, once IBMtape driver is unloaded from the kernel or uninstalled from the system. Backup these entries into a file. And, copy it into driver_aliases file using # cat backup_file >> /etc/driver_aliases each time when you upgrade IBMtape driver.

klin121628

這個有點夸張了，不會SOLARIS你賣什么帶庫啊，而且?guī)�庫做配置的時候也會需要選擇主機平臺的

mantuntun

好貼，有空試試看。 \r\n\r\nSolaris Medium changer scsiclass = 8

aib

呵呵，我這邊有個項目也是SUN主機連HP的帶庫。\r\nSUN說他不懂HP的設備，HP問我Solaris有沒有ioscan。。。\r\n最終還是自己搞定...