我打算在Dell 640m上安裝Solaris 10的X86版,

jpartley

請問有沒有安裝過的大俠,有沒有什么要注意的?\r\n我過兩天裝了給大家發(fā)總結(jié)

jpartley

昨天第一次安裝測試,在配置Video的時候沒有能夠通過測試,沒有繼續(xù)安裝\r\n今天只查到一些資料；\r\n\r\n\r\nThe latest Xsun patches have \"generic VESA/SVGA\" support. (patch 109401), so it should work with almost any video card. You can also tweak it to support 1400x1050 \r\nFor support for Dell\'s new super-hi-res screens (nv based), you can try just pkgadd -d DELLwxga.pkg, and then selecting one of the \"Dell W*XGA\" LCD Monitors from kdmconfig. \r\n\r\nFor a wider general range of card suport from Xsun, you may want to install the xfree86 \'porting\' kit from Sun. Despite its \'porting kit\' name, it actually comes with compiled binaries that are plug-n-go, for any card that xfree4.2.0 supports. You can also get a patch for suns patch, to better support some ATI cards, from Juergen Keil\'s site \r\n\r\nUnfortunately, the support is not 100% perfect: using a geforce2 with the kit will display most things, but certain very rare apps will have corrupted graphics (As of Dec 14, 2001). Unfortunately, one of these \"rare apps\" is Netscape 6.1, but the good news is, you can allegedly work around this issue by calling it with --no-xshm \r\n\r\nFIX for solaris 9 x86: install patch 112786 \r\n\r\nAnother option is XiG\'s commercial X server. XiG\'d drivers support a few cards that xfree does not. Their drivers are production quality, and if you pay a little extra, you can get 3d acceleration for your laptop, too.