請教高手 謝謝！ sunv880 S9系統啟動問題（現象見貼子）

ccceee

系統重起后出現以下提示
INIT: Cantnot open /etc/default/init.
Environment not initialized.
configuring IPV4 interfaces:eri0.
Hosname: core-app metainit:core-app:stale databases Insufficient metadevice database replicas located.
Use metadb to delete databsses which are broken.
Ignore any "Read-only file system" erro messages.
Reboot the system when finished to reload the metadevic database.
After reboot,repair any broken database replicas which were deleted.
Type control-d to proceed with normal startup,(or give root password for system maintance):
問題：不能進入系統，CTRL-D 不起作用，同時也不能進入但用戶模式
      只能在OK狀態下設置從光盤引導才能進入單用戶模式。
請教高手給與指點，這種現象是什么問題，怎么解決，謝謝！

race

Reboot the system when finished to reload the metadevic database.
After reboot,repair any broken database replicas which were deleted.

問題在這里，是不是用了SDS？

ccceee

系統裝了SDS,但是沒有使用，上面問題怎么來解決，請指教.

houji

先把sds的設置去掉，如metadb -d c0t0d0s7

ccceee

沒有做設置，
INIT: Cantnot open /etc/default/init.
Environment not initialized.
這是什么原因，意思好像是說 /etc/default/init這個文件不能被打開，環境不能初始化，這次重起多了一條這樣的信息就不能正常啟動了，會不會使這里的原因。我的系統沒有做RAID

C.Arthur

boot cdrom -s 修復/etc/default/init

linkz

可能是/etc/init文件壞了.boot -s cdrom 然后從其他正常的機器拷貝一個/etc/init即可.

ccceee

我的系統在啟動時出現
OS-IO WARNING:I2C_O BUS BUSY AFTER INIT ADDR=0XE2;
WARNING:I2C_0 BUS BUSY AFTER INIT ADDR=0XE6;
WARNING:I2C_0 BUS BUSY AFTER INIT ADDR=0XE8;
WARNING:I2C_0 BUS BUSY AFTER INIT ADDR=0XEC;
WARNING:FAILED TO INSTALL "HPC3130" DRIVER.
WARNING: I2C_0 BUS BUSY AFTER INIT ADDR=0X82;
請問這是什么情況，該如何下手解決
請各位大哥鼎立幫忙呀

C.Arthur

boot cdrom -s的時候？

ccceee

boot cdrom -s 沒有出現以上信息，從硬盤啟動時出現的問題