用nfs啟動系統的問題

a104727798

nand flash啟動 進入vivi模式，輸入以下
param set linux_cmd_line "console=ttySAC0 root=/dev/nfs nfsroot=192.168.1.21:/opt/FriendlyARM/QQ2440/root_nfs ip=192.168.1.23:192.168.1.21:192.168.1.21:255.255.255.0:sbc2440.arm9.net:eth0ff"
我的虛擬機linux是192.168.1.21 板子是192.168.1.23 我電腦是192.168.1.22，這樣設置對嗎？
出現這樣的情況：
IP-Config: Complete:
      device=eth0, addr=192.168.1.23, mask=255.255.255.0, gw=192.168.1.21,
    host=sbc2440, domain=, nis-domain=arm9.net,
    bootserver=192.168.1.21, rootserver=192.168.1.21, rootpath=
Looking up port of RPC 100003/2 on 192.168.1.21
portmap: server 192.168.1.21 not responding, timed out
Root-NFS: Unable to get nfsd port number from server, using default
Looking up port of RPC 100005/1 on 192.168.1.21
portmap: server 192.168.1.21 not responding, timed out
Root-NFS: Unable to get mountd port number from server, using default
Root-NFS: Server returned error -5 while mounting /opt/FriendlyARM/QQ2440/root_n
fs
VFS: Unable to mount root fs via NFS, trying floppy.
VFS: Cannot open root device "nfs" or unknown-block(2,0)
Please append a correct "root=" boot option
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0)
就是不能啟動，大家?guī)蛶兔�看下是哪里的問題？謝謝

zhuhefang2006

參考下面的帖子，可能你能夠找到答案
http://www.arm9home.com/bbs/read.php?tid=608&fpage=4

zhuhefang2006

估計是你的nfs配置有問題，防火墻沒關閉
方法參考下面的帖子
http://hi.baidu.com/qrs1/blog/item/9a2ccb244bde08358644f970.html

[ 本帖最后由 zhuhefang2006 于 2008-10-5 22:54 編輯 ]

charlieli1

網關192.168.1.21?設置有問題吧。還有，啟動NFS服務要關掉防火墻……

a104727798

發現幾個問題，1.linux防火墻沒關。2.不是nand flash啟動。3.板子的ip恢復到默認的230了。
哎，問題更正后還是沒有啟動起來，還真是個問題啊