剛才刷了一下i7500的2.1版本，能跑起來了

T-Bagwell

我是從里面直接down的update.zip刷進去的，camera不好使，其他的感覺還不錯，正在sync代碼，打算看看

分享一下連接
http://code.google.com/p/gaosp/wiki/Building

This is the way to compile Galaxy Android Open Source Project from scratch


This is the way to compile Galaxy Android Open Source Project from scratch
Be careful, google repo has changed, please sync with eclair
How to
Use your system image :
Use your update.zip (beta) :
This will give you a ready-to-use system image in "out/target/product/I7500"

Please note that the project is starting, lot of things do not work yet.

Be careful, google repo has changed, please sync with eclair
How to
Clone the Android AOSP project (Follow instructions at http://source.android.com/source/download.html. Clone eclair branch by

1. repo init -b eclair

復制代碼

instead of cupcake. Remember to run repo sync after repo init)
Download local_manifest.xml :

1. cd .repo && wget http://gaosp.googlecode.com/files/local_manifest.xml && cd -

復制代碼

Run

1. repo sync

復制代碼

to update the repositories
Push the PDA tar file from official (!CHANGE!) 1.6 odin update in vendor/Samsung/I7500/ renamed as I7500-PDA.tar.
Push the last cyanogemod-ds rom (http://forum.xda-developers.com/showthread.php?t=672992) in vendor/Samsung/I7500/, renamed as CM.zip.
Extract the proprietary files from update:

1. cd vendor/Samsung/I7500/ && ./unzip-files.sh I7500-PDA.tar && cd -

復制代碼

1) Method 1 - manual mode (will give you a system.img)

Run

1. source build/envsetup.sh

復制代碼

to setup the build environnment
Run

1. lunch I7500-eng

復制代碼

to setup the environnment for I7500
Run

1. make

復制代碼

(make -j3, make -j5, regarding of the number of parallel jobs you want)
2) Method 2 - automatic mode (will give you a full update.zip) (beta)

Run

1. source vendor/Samsung/I7500/scripts/gaosp.source

復制代碼

Run

1. build_all

復制代碼

Note : if you have a librpc error in manual mode, just "make librpc" then "make" again.

Use your system image :
That can be dangerous. It may introduce regressions or brick your phone, do this at your own risk.

You will need drakaz' recovery image available at: http://www.drakaz.com/forum/viewtopic.php?id=5

Boot recovery (vol down + call + end call)
Backup the system with Nandroid
Get the boot.img in the download section
Place the boot.img and system.img on the sdcard : adb push out/target/product/I7500/system.img /sdcard/ and adb push boot.img /sdcard/
Remount /system in read-write : adb remount
Open shell: adb shell
Go into the /system directory :

1. cd /system/

復制代碼

Remove all the files :

1. rm -rf *

復制代碼

Extract the system image :

1. unyaffs /sdcard/system.im

復制代碼

g
Flash the boot image :

1. flash_image boot /sdcard/boot.img

復制代碼

Sync :

1. sync

復制代碼

Select

1. 'Wipe data' from the recovery menu.

復制代碼

Select

1. 'Reboot system now'

復制代碼

Use your update.zip (beta) :
That can be dangerous. It may introduce regressions or brick your phone, do this at your own risk.

You will need drakaz' recovery image available at: http://www.drakaz.com/forum/viewtopic.php?id=5

Boot recovery (vol down + call + end call)
Backup the system with Nandroid
Push the update.zip in /sdcard/
Flash the update using

1. 'Update sdcard:update.zip"

復制代碼

option
Select

1. 'Wipe data' from the recovery menu.

復制代碼

Restore gapps by your own
Reboot : reboot

send_linux

不敢像你這樣刷機，還是老實等著官方的包出來，刷我的2.2

T-Bagwell

不敢像你這樣刷機，還是老實等著官方的包出來，刷我的2.2
send_linux 發表于 2010-06-27 22:52

   

這個叫定制了
我正在編譯呢，一會看看能不能跑上去玩玩

renxiao2003

我沒有手機，不用刷了。

T-Bagwell

編譯完了，燒到手機里面了
看來了一下camera不能使用的原因
camera用的是libqcamera.so了，這個libqcamera.so是在
vendor/Samsung/I7500/qcom/proprietary-open/dsp/libqcamera/Android.mk
不過這個文件注掉了，可能是里面寫的有問題吧

prolj

重新編譯libqcamera.so，push上去就可以了。

0vk0

不敢像你這樣刷機，還是老實等著官方的包出來，刷我的2.2
send_linux 發表于 2010-06-27 22:52

    這樣才能學習嘛

T-Bagwell

重新編譯libqcamera.so，push上去就可以了。
prolj 發表于 2010-06-30 09:30

   
那你能幫編一個不？
我不會

prolj

回復 8# T-Bagwell


     ft，我沒你的代碼啊。
就是cd到那個模塊的目錄，然后mm，然后在out下面可以找到那個so。

starT_T

編譯完了，燒到手機里面了
看來了一下camera不能使用的原因
camera用的是libqcamera.so了，這個libqcam ...
T-Bagwell 發表于 2010-06-30 08:33

    liu qi hahaha....