ES45 OCP顯示 bad RMC flash ，大家?guī)蛡�(gè)忙！

lirongpu10

現運行的一臺ES45（雙電源）因一塊電源掉電，重新拔插電源后不能恢復正常（未斷電生啟），正常斷電重啟后，OCP顯示 “bad RMC flash ”，系統再無任何反應，請大家?guī)蛡�(gè)忙分析一下��！謝謝。

seanding

如果不能進入>>>，試試軟盤升級firmware

You can update the remote management console firmware from flash ROM
using the LFU.
1.  Load the update medium.
2.  At the UPD> prompt, exit from the update utility, and answer y to the
manual update prompt.  Enter update RMC to update the firmware.
UPD> exit
Do you want to do a manual update [y/(n)] y
***** Loadable Firmware Update Utility *****
-------------------------------------------------------------
Function    Description
-------------------------------------------------------------
Display     Displays the system’s configuration table.
Exit        Done exit LFU (reset).
List        Lists the device, revision, firmware name, and
update revision.
Readme      Lists important release information.
Update      Replaces current firmware with loadable data
image.
Verify      Compares loadable and hardware images.
? or Help   Scrolls this function table.
-----------------------------------------------------------
UPD> update RMC
.
.

lirongpu10

謝謝朋友的回復，用你說的方法試了，不行，換了主板，OK了。在此也多謝論壇里的朋友們�。。。�

swallowcn

需要es45電源的話可以聯系我們!