dell 機器安裝freebsd8.0 AMD64 存在嚴重問題。江湖救急～

cls

dell 機器安裝freebsd8.0 AMD64 存在嚴重問題。江湖救急～

剛才發居然顯示來路不正確。 暈死。

dell2950


問題：
如下提示：

Apr 2 18:06:12 xl kernel: mfi0: <Dell PERC 6> port 0xec00-0xecff mem 0xfc480000-0xfc4bffff,0xfc440000-0xfc47ffff irq 16 at device 0.0 on pci1
Apr 2 18:06:12 xl kernel: mfi0: Megaraid SAS driver Ver 3.00
Apr 2 18:06:12 xl kernel: mfi0: 5577 (323546672s/0x0020/info) - Shutdown command received from host
Apr 2 18:06:12 xl kernel: mfi0: 5578 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/1f0c/1028)
Apr 2 18:06:12 xl kernel: mfi0: 5579 (boot + 3s/0x0020/info) - Firmware version 1.21.02-0528
Apr 2 18:06:12 xl kernel: mfi0: 5580 (boot + 3s/0x0008/info) - Battery Present
Apr 2 18:06:12 xl kernel: mfi0: 5581 (boot + 3s/0x0020/info) - Controller hardware revision ID (0x0)
Apr 2 18:06:12 xl kernel: mfi0: 5582 (boot + 3s/0x0020/info) - Package version 6.1.1-0047
Apr 2 18:06:12 xl kernel: mfi0: 5583 (boot + 3s/0x0020/info) - Board Revision
Apr 2 18:06:12 xl kernel: mfi0: 5584 (boot + 10s/0x0004/info) - Enclosure PD 20(c None/p0) communication restored
Apr 2 18:06:12 xl kernel: mfi0: 5585 (boot + 11s/0x0002/info) - Inserted: Encl PD 20
Apr 2 18:06:12 xl kernel: mfi0: 5586 (boot + 11s/0x0002/info) - Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=500240805e70d500,0000000000000000
Apr 2 18:06:12 xl kernel: mfi0: 5587 (boot + 11s/0x0002/info) - Inserted: PD 00(e0x20/s0)
Apr 2 18:06:12 xl kernel: mfi0: 5588 (boot + 11s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=1221000000000000,0000000000000000
Apr 2 18:06:12 xl kernel: mfi0: 5589 (boot + 11s/0x0002/WARN) - PD 00(e0x20/s0) is not a certified drive
Apr 2 18:06:12 xl kernel: mfi0: 5590 (boot + 11s/0x0002/info) - Inserted: PD 01(e0x20/s1)
Apr 2 18:06:12 xl kernel: mfi0: 5591 (boot + 11s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=1221000001000000,0000000000000000
Apr 2 18:06:12 xl kernel: mfi0: 5592 (boot + 11s/0x0002/WARN) - PD 01(e0x20/s1) is not a certified drive
Apr 2 18:06:12 xl kernel: mfi0: 5593 (boot + 11s/0x0002/info) - Inserted: PD 02(e0x20/s2)
Apr 2 18:06:12 xl kernel: mfi0: 5594 (boot + 11s/0x0002/info) - Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000
Apr 2 18:06:12 xl kernel: mfi0: 5595 (boot + 11s/0x0002/WARN) - PD 02(e0x20/s2) is not a certified drive
Apr 2 18:06:12 xl kernel: mfi0: 5596 (boot + 11s/0x0002/info) - Inserted: PD 03(e0x20/s3)
Apr 2 18:06:12 xl kernel: mfi0: 5597 (boot + 11s/0x0002/info) - Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000
Apr 2 18:06:12 xl kernel: mfi0: 5598 (boot + 11s/0x0002/WARN) - PD 03(e0x20/s3) is not a certified drive
Apr 2 18:06:12 xl kernel: mfi0: 5599 (boot + 11s/0x0002/info) - Inserted: PD 04(e0x20/s4)
Apr 2 18:06:12 xl kernel: mfi0: 5600 (boot + 11s/0x0002/info) - Inserted: PD 04(e0x20/s4) Info: enclPd=20, scsiType=0, portMap=04, sasAddr=1221000004000000,0000000000000000
Apr 2 18:06:12 xl kernel: mfi0: 5601 (boot + 11s/0x0002/WARN) - PD 04(e0x20/s4) is not a certified drive
Apr 2 18:06:12 xl kernel: mfi0: 5602 (boot + 11s/0x0002/info) - Inserted: PD 05(e0x20/s5)
Apr 2 18:06:12 xl kernel: mfi0: 5603 (boot + 11s/0x0002/info) - Inserted: PD 05(e0x20/s5) Info: enclPd=20, scsiType=0, portMap=05, sasAddr=1221000005000000,0000000000000000
Apr 2 18:06:12 xl kernel: mfi0: 5604 (boot + 11s/0x0002/WARN) - PD 05(e0x20/s5) is not a certified drive
Apr 2 18:06:12 xl kernel: mfi0: 5605 (323546705s/0x0020/info) - Time established as 04/02/10 18:05:05; (25 seconds since power on)
Apr 2 18:06:12 xl kernel: mfi0: 5606 (323546748s/0x0008/info) - Battery temperature is normal
Apr 2 18:06:12 xl kernel: mfi0: [ITHREAD]

查找資料為：
%s is not a certified drive (%s 是未經認證的磁碟機)

**。。。了

dmesg為

Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RELEASE #0: Sat Nov 21 15:02:08 UTC 2009
root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU E5405 @ 2.00GHz (1997.01-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x10676 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xce33d<SSE3,DTES64,MON,DS_CPL,VMX,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 4294967296 (4096 MB)
avail memory = 4102701056 (3912 MB)
ACPI APIC Table: <DELL PE_SC3 >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 4
cpu1 (AP): APIC ID: 5
cpu2 (AP): APIC ID: 6
cpu3 (AP): APIC ID: 7
cpu4 (AP): APIC ID: 0
cpu5 (AP): APIC ID: 1
cpu6 (AP): APIC ID: 2
cpu7 (AP): APIC ID: 3
ioapic0: Changing APIC ID to 8
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <DELL PE_SC3> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci4: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci4
pci5: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci5
pci6: <ACPI PCI bus> on pcib3
pcib4: <;PCI-PCI bridge> at device 0.0 on pci6
pci7: <;PCI bus> on pcib4
bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem 0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci7
miibus0: <MII bus> on bce0
brgphy0: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bce0: Ethernet address: 00:24:e8:68:55:b7
bce0: [ITHREAD]
bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C (4.6.0); Flags (MSI|MFW); MFW (ipms 1.6.0)
pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci5
pci8: <ACPI PCI bus> on pcib5
pcib6: <;PCI-PCI bridge> at device 0.3 on pci4
pci9: <;PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci1: <ACPI PCI bus> on pcib7
mfi0: <Dell PERC 6> port 0xec00-0xecff mem 0xfc480000-0xfc4bffff,0xfc440000-0xfc47ffff irq 16 at device 0.0 on pci1
mfi0: Megaraid SAS driver Ver 3.00
mfi0: 5701 (323547651s/0x0020/info) - Shutdown command received from host
mfi0: 5702 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/1f0c/1028)
mfi0: 5703 (boot + 3s/0x0020/info) - Firmware version 1.21.02-0528
mfi0: 5704 (boot + 3s/0x0008/info) - Battery Present
mfi0: 5705 (boot + 3s/0x0020/info) - Controller hardware revision ID (0x0)
mfi0: 5706 (boot + 3s/0x0020/info) - Package version 6.1.1-0047
mfi0: 5707 (boot + 3s/0x0020/info) - Board Revision
mfi0: 5708 (boot + 10s/0x0004/info) - Enclosure PD 20(c None/p0) communication restored
mfi0: 5709 (boot + 11s/0x0002/info) - Inserted: Encl PD 20
mfi0: 5710 (boot + 11s/0x0002/info) - Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=500240805e70d500,0000000000000000
mfi0: 5711 (boot + 11s/0x0002/info) - Inserted: PD 00(e0x20/s0)
mfi0: 5712 (boot + 11s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=1221000000000000,0000000000000000
mfi0: 5713 (boot + 11s/0x0002/WARN) - PD 00(e0x20/s0) is not a certified drive
mfi0: 5714 (boot + 11s/0x0002/info) - Inserted: PD 01(e0x20/s1)
mfi0: 5715 (boot + 11s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=1221000001000000,0000000000000000
mfi0: 5716 (boot + 11s/0x0002/WARN) - PD 01(e0x20/s1) is not a certified drive
mfi0: 5717 (boot + 11s/0x0002/info) - Inserted: PD 02(e0x20/s2)
mfi0: 5718 (boot + 11s/0x0002/info) - Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000
mfi0: 5719 (boot + 11s/0x0002/WARN) - PD 02(e0x20/s2) is not a certified drive
mfi0: 5720 (boot + 11s/0x0002/info) - Inserted: PD 03(e0x20/s3)
mfi0: 5721 (boot + 11s/0x0002/info) - Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000
mfi0: 5722 (boot + 11s/0x0002/WARN) - PD 03(e0x20/s3) is not a certified drive
mfi0: 5723 (boot + 11s/0x0002/info) - Inserted: PD 04(e0x20/s4)
mfi0: 5724 (boot + 11s/0x0002/info) - Inserted: PD 04(e0x20/s4) Info: enclPd=20, scsiType=0, portMap=04, sasAddr=1221000004000000,0000000000000000
mfi0: 5725 (boot + 11s/0x0002/WARN) - PD 04(e0x20/s4) is not a certified drive
mfi0: 5726 (boot + 11s/0x0002/info) - Inserted: PD 05(e0x20/s5)
mfi0: 5727 (boot + 11s/0x0002/info) - Inserted: PD 05(e0x20/s5) Info: enclPd=20, scsiType=0, portMap=05, sasAddr=1221000005000000,0000000000000000
mfi0: 5728 (boot + 11s/0x0002/WARN) - PD 05(e0x20/s5) is not a certified drive
mfi0: 5729 (323547684s/0x0020/info) - Time established as 04/02/10 18:21:24; (25 seconds since power on)
mfi0: 5730 (323547727s/0x0008/info) - Battery temperature is normal
mfi0: [ITHREAD]
pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci10: <ACPI PCI bus> on pcib8
pcib9: <;PCI-PCI bridge> at device 5.0 on pci0
pci11: <;PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci12: <ACPI PCI bus> on pcib10
pcib11: <;PCI-PCI bridge> at device 7.0 on pci0
pci13: <;PCI bus> on pcib11
pcib12: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib12
pcib13: <;PCI-PCI bridge> at device 0.0 on pci2
pci3: <;PCI bus> on pcib13
bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem 0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci3
miibus1: <MII bus> on bce1
brgphy1: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bce1: Ethernet address: 00:24:e8:68:55:b5
bce1: [ITHREAD]
bce1: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C (4.6.0); Flags (MSI|MFW); MFW (ipms 1.6.0)
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0xcce0-0xccff irq 21 at device 29.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x0000
usbus0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0xccc0-0xccdf irq 20 at device 29.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x0000
usbus1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0xcca0-0xccbf irq 21 at device 29.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x0000
usbus2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2
uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port 0xcc80-0xcc9f irq 20 at device 29.3 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x0000
usbus3: <Intel 631XESB/632XESB/3100 USB controller USB-4> on uhci3
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xfc500400-0xfc5007ff irq 21 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <Intel 63XXESB USB 2.0 controller> on ehci0
pcib14: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci14: <ACPI PCI bus> on pcib14
vgapci0: <VGA-compatible display> port 0xdc00-0xdcff mem 0xd8000000-0xdfffffff,0xfc2d0000-0xfc2dffff irq 19 at device 13.0 on pci14
isab0: <;PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 SATA300 controller> port 0xcc78-0xcc7f,0xcc70-0xcc73,0xcc60-0xcc67,0xcc58-0xcc5b,0xcc40-0xcc4f mem 0xfc500000-0xfc5003ff irq 23 at device 31.2 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <Non-standard ns8250 class UART with FIFOs> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
p4tcc3: <CPU Frequency Thermal Control> on cpu3
cpu4: <ACPI CPU> on acpi0
p4tcc4: <CPU Frequency Thermal Control> on cpu4
cpu5: <ACPI CPU> on acpi0
p4tcc5: <CPU Frequency Thermal Control> on cpu5
cpu6: <ACPI CPU> on acpi0
p4tcc6: <CPU Frequency Thermal Control> on cpu6
cpu7: <ACPI CPU> on acpi0
p4tcc7: <CPU Frequency Thermal Control> on cpu7
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xc9000-0xc9fff,0xec000-0xeffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
acd0: DVDROM <TSSTcorpDVD-ROM TS-L333A/D250> at ata3-master SATA150
mfi0: 5731 (323547727s/0x0008/info) - Current capacity of the battery is above threshold
mfid0: <MFI Logical Disk> on mfi0
mfid0: 237824MB (487063552 sectors) RAID volume '' is optimal
mfid1: <MFI Logical Disk> on mfi0
mfid1: 237824MB (487063552 sectors) RAID volume '' is optimal
mfid2: <MFI Logical Disk> on mfi0
mfid2: 237824MB (487063552 sectors) RAID volume '' is optimal
SMP: AP CPU #1 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #5 Launched!
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Root mount waiting for: usbus4
ugen4.2: <vendor 0x04b4> at usbus4
uhub5: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 2> on usbus4
Root mount waiting for: usbus4
ugen1.2: <CHESEN> at usbus1
ukbd0: <CHESEN USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus1
kbd2 at ukbd0
uhid0: <CHESEN USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus1
uhub5: 4 ports with 4 removable, self powered
Trying to mount root from ufs:/dev/mfid0s1a
bce0: link state changed to UP

希望能得到幫助！ Sad

macafee

難道DELL也開始強制使用“自有固件”的硬盤了？

aramis

很少見，很少見，dell從H700和H800的卡才開始只認自家硬盤

你的日志顯示三個磁盤都是非認證硬盤，但你的系統已經安裝上去了，說明還是可以用的，

至于你說的第三個盤掛載不上去，那就是系統這邊的問題了

cls

第三塊硬盤搞定。 fstab 寫錯了～ HOHO

CLS

再提供些資料參考下。
freebsd7.1 i386 的dmesg資料

同臺機器，因為SSH 連接有問題。 ls下就卡死斷線。 逼得升級到8.0 AMD64

在7.1 下的dmesg

1. xl# dmesg
   
2. Copyright (c) 1992-2009 The FreeBSD Project.
   
3. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
   
4.         The Regents of the University of California. All rights reserved.
   
5. FreeBSD is a registered trademark of The FreeBSD Foundation.
   
6. FreeBSD 7.1-RELEASE #0: Thu Jan  1 14:37:25 UTC 2009
   
7.     root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
   
8. Timecounter "i8254" frequency 1193182 Hz quality 0
   
9. CPU: Intel(R) Xeon(R) CPU           E5405  @ 2.00GHz (1995.01-MHz 686-class CPU)
   
10.   Origin = "GenuineIntel"  Id = 0x10676  Stepping = 6
    
11.   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
    
12.   Features2=0xce33d<SSE3,DTES64,MON,DS_CPL,VMX,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1>
    
13.   AMD Features=0x20100000<NX,LM>
    
14.   AMD Features2=0x1<LAHF>
    
15.   Cores per package: 4
    
16. real memory  = 3484745728 (3323 MB)
    
17. avail memory = 3405537280 (3247 MB)
    
18. ACPI APIC Table: <DELL   PE_SC3  >
    
19. FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
    
20. cpu0 (BSP): APIC ID:  4
    
21. cpu1 (AP): APIC ID:  0
    
22. cpu2 (AP): APIC ID:  1
    
23. cpu3 (AP): APIC ID:  2
    
24. cpu4 (AP): APIC ID:  3
    
25. cpu5 (AP): APIC ID:  5
    
26. cpu6 (AP): APIC ID:  6
    
27. cpu7 (AP): APIC ID:  7
    
28. ioapic0: Changing APIC ID to 8
    
29. ioapic0 <Version 2.0> irqs 0-23 on motherboard
    
30. kbd1 at kbdmux0
    
31. ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
    
32. acpi0: <DELL PE_SC3> on motherboard
    
33. acpi0: [ITHREAD]
    
34. acpi0: Power Button (fixed)
    
35. Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
    
36. acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
    
37. acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
    
38. Timecounter "HPET" frequency 14318180 Hz quality 900
    
39. pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
    
40. pci0: <ACPI PCI bus> on pcib0
    
41. pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
    
42. pci4: <ACPI PCI bus> on pcib1
    
43. pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci4
    
44. pci5: <ACPI PCI bus> on pcib2
    
45. pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci5
    
46. pci6: <ACPI PCI bus> on pcib3
    
47. pcib4: <PCI-PCI bridge> at device 0.0 on pci6
    
48. pci7: <PCI bus> on pcib4
    
49. bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem 0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci7
    
50. miibus0: <MII bus> on bce0
    
51. brgphy0: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus0
    
52. brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
    
53. bce0: Ethernet address: 00:24:e8:68:55:b7
    
54. bce0: [ITHREAD]
    
55. bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W (0x04060005); Flags( MFW MSI )
    
56. pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci5
    
57. pci8: <ACPI PCI bus> on pcib5
    
58. pcib6: <PCI-PCI bridge> at device 0.3 on pci4
    
59. pci9: <PCI bus> on pcib6
    
60. pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0
    
61. pci1: <ACPI PCI bus> on pcib7
    
62. mfi0: <Dell PERC 6> port 0xec00-0xecff mem 0xfc480000-0xfc4bffff,0xfc440000-0xfc47ffff irq 16 at device 0.0 on pci1
    
63. mfi0: Megaraid SAS driver Ver 3.00
    
64. mfi0: 3833 (319405957s/0x0020/info) - Shutdown command received from host
    
65. mfi0: 3834 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/1f0c/1028)
    
66. mfi0: 3835 (boot + 3s/0x0020/info) - Firmware version 1.21.02-0528
    
67. mfi0: 3836 (boot + 3s/0x0008/info) - Battery Present
    
68. mfi0: 3837 (boot + 3s/0x0020/info) - Controller hardware revision ID (0x0)
    
69. mfi0: 3838 (boot + 3s/0x0020/info) - Package version 6.1.1-0047
    
70. mfi0: 3839 (boot + 3s/0x0020/info) - Board Revision
    
71. mfi0: 3840 (boot + 10s/0x0004/info) - Enclosure PD 20(c None/p0) communication restored
    
72. mfi0: 3841 (boot + 11s/0x0002/info) - Inserted: Encl PD 20
    
73. mfi0: 3842 (boot + 11s/0x0002/info) - Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=500240805e70d500,0000000000000000
    
74. mfi0: 3843 (boot + 11s/0x0002/info) - Inserted: PD 00(e0x20/s0)
    
75. mfi0: 3844 (boot + 11s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=1221000000000000,0000000000000000
    
76. mfi0: 3845 (boot + 11s/0x0002/WARN) - PD 00(e0x20/s0) is not a certified drive
    
77. mfi0: 3846 (boot + 11s/0x0002/info) - Inserted: PD 01(e0x20/s1)
    
78. mfi0: 3847 (boot + 11s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=1221000001000000,0000000000000000
    
79. mfi0: 3848 (boot + 11s/0x0002/WARN) - PD 01(e0x20/s1) is not a certified drive
    
80. mfi0: 3849 (boot + 11s/0x0002/info) - Inserted: PD 02(e0x20/s2)
    
81. mfi0: 3850 (boot + 11s/0x0002/info) - Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000
    
82. mfi0: 3851 (boot + 11s/0x0002/WARN) - PD 02(e0x20/s2) is not a certified drive
    
83. mfi0: 3852 (boot + 11s/0x0002/info) - Inserted: PD 03(e0x20/s3)
    
84. mfi0: 3853 (boot + 11s/0x0002/info) - Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000
    
85. mfi0: 3854 (boot + 11s/0x0002/WARN) - PD 03(e0x20/s3) is not a certified drive
    
86. mfi0: 3855 (boot + 11s/0x0002/info) - Inserted: PD 04(e0x20/s4)
    
87. mfi0: 3856 (boot + 11s/0x0002/info) - Inserted: PD 04(e0x20/s4) Info: enclPd=20, scsiType=0, portMap=04, sasAddr=1221000004000000,0000000000000000
    
88. mfi0: 3857 (boot + 11s/0x0002/WARN) - PD 04(e0x20/s4) is not a certified drive
    
89. mfi0: 3858 (boot + 11s/0x0002/info) - Inserted: PD 05(e0x20/s5)
    
90. mfi0: 3859 (boot + 11s/0x0002/info) - Inserted: PD 05(e0x20/s5) Info: enclPd=20, scsiType=0, portMap=05, sasAddr=1221000005000000,0000000000000000
    
91. mfi0: 3860 (boot + 11s/0x0002/WARN) - PD 05(e0x20/s5) is not a certified drive
    
92. mfi0: 3861 (319405915s/0x0020/info) - Time established as 02/13/10 19:51:55; (28 seconds since power on)
    
93. mfi0: 3862 (319405955s/0x0008/info) - Battery temperature is normal
    
94. mfi0: [ITHREAD]
    
95. pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0
    
96. pci10: <ACPI PCI bus> on pcib8
    
97. pcib9: <PCI-PCI bridge> at device 5.0 on pci0
    
98. pci11: <PCI bus> on pcib9
    
99. pcib10: <ACPI PCI-PCI bridge> at device 6.0 on pci0
    
100. pci12: <ACPI PCI bus> on pcib10
     
101. pcib11: <PCI-PCI bridge> at device 7.0 on pci0
     
102. pci13: <PCI bus> on pcib11
     
103. pcib12: <ACPI PCI-PCI bridge> at device 28.0 on pci0
     
104. pci2: <ACPI PCI bus> on pcib12
     
105. pcib13: <PCI-PCI bridge> at device 0.0 on pci2
     
106. pci3: <PCI bus> on pcib13
     
107. bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem 0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci3
     
108. miibus1: <MII bus> on bce1
     
109. brgphy1: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus1
     
110. brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
     
111. bce1: Ethernet address: 00:24:e8:68:55:b5
     
112. bce1: [ITHREAD]
     
113. bce1: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W (0x04060005); Flags( MFW MSI )
     
114. uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0xcce0-0xccff irq 21 at device 29.0 on pci0
     
115. uhci0: [GIANT-LOCKED]
     
116. uhci0: [ITHREAD]
     
117. usb0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
     
118. usb0: USB revision 1.0
     
119. uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
     
120. uhub0: 2 ports with 2 removable, self powered
     
121. uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0xccc0-0xccdf irq 20 at device 29.1 on pci0
     
122. uhci1: [GIANT-LOCKED]
     
123. uhci1: [ITHREAD]
     
124. usb1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
     
125. usb1: USB revision 1.0
     
126. uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
     
127. uhub1: 2 ports with 2 removable, self powered
     
128. uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0xcca0-0xccbf irq 21 at device 29.2 on pci0
     
129. uhci2: [GIANT-LOCKED]
     
130. uhci2: [ITHREAD]
     
131. usb2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2
     
132. usb2: USB revision 1.0
     
133. uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
     
134. uhub2: 2 ports with 2 removable, self powered
     
135. uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port 0xcc80-0xcc9f irq 20 at device 29.3 on pci0
     
136. uhci3: [GIANT-LOCKED]
     
137. uhci3: [ITHREAD]
     
138. usb3: <Intel 631XESB/632XESB/3100 USB controller USB-4> on uhci3
     
139. usb3: USB revision 1.0
     
140. uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
     
141. uhub3: 2 ports with 2 removable, self powered
     
142. ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xfc500400-0xfc5007ff irq 21 at device 29.7 on pci0
     
143. ehci0: [GIANT-LOCKED]
     
144. ehci0: [ITHREAD]
     
145. usb4: EHCI version 1.0
     
146. usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
     
147. usb4: <Intel 63XXESB USB 2.0 controller> on ehci0
     
148. usb4: USB revision 2.0
     
149. uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
     
150. uhub4: 8 ports with 8 removable, self powered
     
151. uhub5: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 2> on uhub4
     
152. uhub5: multiple transaction translators
     
153. uhub5: 4 ports with 4 removable, self powered
     
154. pcib14: <ACPI PCI-PCI bridge> at device 30.0 on pci0
     
155. pci14: <ACPI PCI bus> on pcib14
     
156. vgapci0: <VGA-compatible display> port 0xdc00-0xdcff mem 0xd8000000-0xdfffffff,0xfc2d0000-0xfc2dffff irq 19 at device 13.0 on pci14
     
157. isab0: <PCI-ISA bridge> at device 31.0 on pci0
     
158. isa0: <ISA bus> on isab0
     
159. atapci0: <Intel 63XXESB2 SATA300 controller> port 0xcc78-0xcc7f,0xcc70-0xcc73,0x
     
160. cc60-0xcc67,0xcc58-0xcc5b,0xcc40-0xcc4f mem 0xfc500000-0xfc5003ff irq 23 at device 31.2 on pci0
     
161. atapci0: [ITHREAD]
     
162. ata2: <ATA channel 0> on atapci0
     
163. ata2: [ITHREAD]
     
164. ata3: <ATA channel 1> on atapci0
     
165. ata3: [ITHREAD]
     
166. fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
     
167. fdc0: does not respond
     
168. device_attach: fdc0 attach returned 6
     
169. sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
     
170. sio0: type 16550A
     
171. sio0: [FILTER]
     
172. sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
     
173. sio1: type 16550A
     
174. sio1: [FILTER]
     
175. cpu0: <ACPI CPU> on acpi0
     
176. p4tcc0: <CPU Frequency Thermal Control> on cpu0
     
177. cpu1: <ACPI CPU> on acpi0
     
178. p4tcc1: <CPU Frequency Thermal Control> on cpu1
     
179. cpu2: <ACPI CPU> on acpi0
     
180. p4tcc2: <CPU Frequency Thermal Control> on cpu2
     
181. cpu3: <ACPI CPU> on acpi0
     
182. p4tcc3: <CPU Frequency Thermal Control> on cpu3
     
183. cpu4: <ACPI CPU> on acpi0
     
184. p4tcc4: <CPU Frequency Thermal Control> on cpu4
     
185. cpu5: <ACPI CPU> on acpi0
     
186. p4tcc5: <CPU Frequency Thermal Control> on cpu5
     
187. cpu6: <ACPI CPU> on acpi0
     
188. p4tcc6: <CPU Frequency Thermal Control> on cpu6
     
189. cpu7: <ACPI CPU> on acpi0
     
190. p4tcc7: <CPU Frequency Thermal Control> on cpu7
     
191. fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
     
192. fdc0: does not respond
     
193. device_attach: fdc0 attach returned 6
     
194. pmtimer0 on isa0
     
195. orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xc9000-0xc9fff,0xec000-0xeffff pnpid ORM0000 on isa0
     
196. ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
     
197. ata0: [ITHREAD]
     
198. ata1 at port 0x170-0x177,0x376 irq 15 on isa0
     
199. ata1: [ITHREAD]
     
200. atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
     
201. atkbd0: <AT Keyboard> irq 1 on atkbdc0
     
202. kbd0 at atkbd0
     
203. atkbd0: [GIANT-LOCKED]
     
204. atkbd0: [ITHREAD]
     
205. ppc0: parallel port not found.
     
206. sc0: <System console> at flags 0x100 on isa0
     
207. sc0: VGA <16 virtual consoles, flags=0x300>
     
208. vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
     
209. Timecounters tick every 1.000 msec
     
210. acd0: DVDROM <TSSTcorpDVD-ROM TS-L333A/D250> at ata3-master SATA150
     
211. mfi0: 3863 (319405955s/0x0008/info) - Current capacity of the battery is above threshold
     
212. mfid0: <MFI Logical Disk> on mfi0
     
213. mfid0: 237824MB (487063552 sectors) RAID volume '' is optimal
     
214. mfid1: <MFI Logical Disk> on mfi0
     
215. mfid1: 237824MB (487063552 sectors) RAID volume '' is optimal
     
216. mfid2: <MFI Logical Disk> on mfi0
     
217. mfid2: 237824MB (487063552 sectors) RAID volume '' is optimal
     
218. SMP: AP CPU #2 Launched!
     
219. SMP: AP CPU #1 Launched!
     
220. SMP: AP CPU #3 Launched!
     
221. SMP: AP CPU #4 Launched!
     
222. SMP: AP CPU #5 Launched!
     
223. SMP: AP CPU #7 Launched!
     
224. SMP: AP CPU #6 Launched!
     
225. Trying to mount root from ufs:/dev/mfid0s1a
     
226. bce0: link state changed to UP
     
227. mfi0: 3864 (319406020s/0x0008/info) - Battery started charging
     
228. mfi0: 3865 (319407710s/0x0008/info) - Battery charge complete
     

復制代碼

cls

i386 7.1  和amd64 8.0 下都存在這個問題。

郁悶了～～～

cls

直接在DELL 那訂購的機器。 怎么會存在這種問題。 原廠配件。

zero-B

很多硬件廠商都沒有明確支持FB的，買機器之前如果想使用FB，就必須去看看HCL，不然買回家的不是機器，是折磨。


另外，目前我還沒有使用FB8.0，一直在7.2上奔跑。。。。大家也可以說說對FB8.0的感覺

冰力

我也一直使用的是 freebsd，公司很多服務器都是 dell 2950和1950，都沒有出現這個情況，而且很穩定。

kisswen

這可真是杯具啊～
這么好的系統
多多支持一下嘛