FreeBSD 安裝的視頻

mymtom

在VMware上安裝FreeBSD 6.2時留下的.
希望對新手有點用.

liu415

老兄，請教一個問題，F(xiàn)reeBSD adsl 上網設置的問題，我是一個新手，系統裝上去了呀，上不了網，著急死了呀，

51911

建議搜索一下，你會成長的更快。以下內容為轉貼
PPP.conf給你參考（改三個地方：網卡，用戶名，密碼）：

default:
set log Phase Chat LCP IPCP CCP tun command
ident user-ppp VERSION (built COMPILATIONDATE)

# Ensure that "device" references the correct serial port
# for your modem. (cuaa0 = COM1, cuaa1 = COM2)
#
# set device PPPoE:rl0              # /dev/cuaa0
set device PPPoEl0
# set speed 115200
set login
set dial # "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
          # \"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT"
# set timeout 900         # 3 minute idle timer (the default)
enable dns            # request DNS info (for resolv.conf)
nat enable yes

#papchap:
#
# edit the next three lines and replace the items in caps with
# the values which have been assigned by your ISP.
#

pppoe:
# set phone
set authname 帳號
set authkey 密碼

set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
add default HISADDR         # Add a (sticky) default route

#96353:
# set phone 96353
# set authname USERNAME
# set authkey PASSWORD

# set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
# add default HISADDR         # Add a (sticky) default route