SUN CLI ilom 如何升級 FIRMWARE ？

tian_005

好久不搞SUN的東西，技術都忘記了。哪位好心人幫忙下，告知在 T5120下ILOM下如果用U盤升級驅動的過程。謝謝了。萬分感謝。好人一生平安

東方蜘蛛

U盤升級驅動?還是要升級ilom的firmware？這可是兩碼事。。。。

東方蜘蛛

Update firmware via web
1.From System Information tab click on > Summary and then click on Update (right side of System Firmware Update)

From ILOM Administration tab > click on Maintenance and then > Firmware Update.

2. Click the button for Enter Update Mode, then click OK in the upgrade confirmation dialog box to proceed.

The Firmware Upgrade page displays the property for uploading the firmware image.

3. In the Firmware Update page, perform one the following actions:

Click Browse to specify the firmware image to upload, then click the Upload button.

東方蜘蛛

Update firmware via CLI
  
1. To load the Oracle ILOM firmware image using the CLI, issue the load -source command followed by the path to locate the firmware image you want to install.

For example:

load -source protocol://username:password@server_ip/<path_to_image>/<image.pkg>

Where the protocol can be: http, https, ftp, tftp, sftp, scp

A series of prompts appear.

2. Type y to load the image file, then type y to enable the applicable options:

Preserve Configuration – Enable this option to save and restore the existing Oracle ILOM firmware settings after the firmware update is complete. For further details **ut this option, see Preserve Oracle ILOM Configuration .

Note. All firmware update options presented for your server are enabled (y) by default when using a script (-script) to perform the firmware update.

3. Oracle ILOM displays a status message when the firmware process is complete.The system will either reboot or power-off to apply the new firmware image.

119beyond

還有需要要升級firmware，難得難得