- 論壇徽章:
- 1
|
SUN V210，本來內存和CPU風扇報錯，換了之后，自檢通過了，由于客戶與設備商都不知道SC的登錄密碼，只能拔了設備的電源，再接上設備的電源，按下前面板的開機按鈕，讓它自檢跳過SC的登陸，但是，自檢完成后，按下ctrl + break,進不了OK，由于進不了SC，不能在SC下修改boot模式，所以，不知道怎么辦求助，下面是自檢信息
Done
0>Interrupt Crosscall....Done
0>Init Memory....-?one
0>PLL Reset....Done
0>Init Memory....Done
0>Test Memory....Done
0>Test CPU Caches....Done
0>Functional CPU Tests....Done
0>IO-Bridge Tests....Done
0>INFO:
0> POST Passed all devices.
0>
0>POST: Return to OBP.
SC Alert: Host System has Reset
Configuring system memory & CPU(s)
Probing system devices
Probing memory
Probing I/O buses
Probing system devices
Probing memory
Probing I/O buses
SC Alert: SC Request to send Break to host.
SC Alert: SC Request to send Break to host.
SC Alert: SC Request to send Break to host.
SC Alert: SC Request to send Break to host.
SC Alert: SC Request to send Break to host. 按break沒反映，按ctrl+break則提示這行，按#. 則退到sc的登錄狀態(tài)，由于沒有密碼，所以進不去，修改不了boot模式
哪位大神有妙招可以進入ok啊 |
|
免費注冊
發(fā)表于 2015-01-20 23:34
