- 論壇徽章:
- 1
|
本帖最后由 raoyunjia 于 2014-06-11 01:58 編輯
回復 6# rf00147
1 我是參照了http://www.91linux.com/html/linu ... 00910/06-17952.html
http://www.72891.cn/forum.php?mod=viewthread&tid=1263969
http://www.72891.cn/thread-1128332-1-1.html
安裝了rsc2.2.3_packages_s9.zip。
安裝過程中和上述鏈接的內容有點不同。
我的是
Setting up serial port interface: DONE
Adding user to RSC:
rscadm: user already exists
when this script completes,
use the rscadm command to correct the error.
Resetting RSC (takes about 90 seconds):
Are you sure you want to reboot RSC (y/n)? y
DONE
Setting up RSC date: DONE
*******************************
RSC has been successfully setup
*******************************
鏈接上的是
Setting up serial port interface: DONE
Adding user to RSC:
A valid password is between 6 and 8 characters, has at least two alphabetic characters, and at least one numeric or special character.
The password must differ from the user's login name and any reverse or circular shift of that login name.
Setting User Password Now ...
Password:
Re-enter Password:
User has been added to RSC
Resetting RSC (takes about 90 seconds):
Are you sure you want to reboot RSC (y/n)? y
DONE
Setting up RSC date: DONE
*******************************
RSC has been successfully setup
*******************************
我分析是：現場的服務器，本來就安裝了rsc卡，應該以前也對rsc進行過配置。并設置了登錄用戶admin。
但是我使用rscadm useradd test 或者# rscadm userpassword admin。 不行。
使用 # scadm userpassword admin ，也不行。但我用man rscadm，是能看到 rscadm userpassword 這個命令格式的解釋的。
2 另外，我想知道 scadm userpassword admin 和 rscadm userpassword admin 有什么區別？
|
|
免費注冊
發表于 2014-06-10 14:03
