求救:L3000錯誤代碼分析

key_1

系統啟動時報錯:
************* SYSTEM ALERT **************
SYSTEM NAME: uninitialized
ALERT LEVEL: 8 = Boot Possible, performance impaired
REASON FOR ALERT
SOURCE: 6 = platform
SOURCE DETAIL: 6 = service processor   SOURCE ID: 0
PROBLEM DETAIL: 1 = selftest result
LEDs:  RUN      ATTENTION     FAULT     REMOTE     POWER
       FLASH    FLASH         ON        OFF        ON
LED State: Boot Failed.  Running non-OS code.  Non-critical error detected.
Check Chassis and Console Logs for error messages.
0x7010028166002030 0B0003FF DD0C0045 - type 14 = Problem Detail
0x4810028166002030 67720000 7361734D - type  9 = ASCII Message        sasMgr
0x4810028166002030 78632E43 4C4F4765 - type  9 = ASCII Message        LOGexc.C
0x7010028166002030 00000000 00002F35 - type 14 = Problem Detail
0x70100A8166002030 0003292E 2F2A2000 - type 14 = Problem Detail
A: ack read of this entry - X: Disable all future alert messages
Anything else skip redisplay the log entry
->Choice:a
*****************************************
Firmware Version  43.22
********** VIRTUAL FRONT PANEL **********
System Boot detected
*****************************************
LEDs:  RUN      ATTENTION     FAULT     REMOTE     POWER
       FLASH    FLASH         ON        OFF        ON
LED State: Boot Failed.  Running non-OS code.  Non-critical error detected.
Check Chassis and Console Logs for error messages.
platform                  config                     626F
*****************************************
************ EARLY BOOT VFP *************
End of early boot detected
*****************************************
------------------------------------------------------------------------------
   (c) Copyright 1995-2002, Hewlett-Packard Company, All rights reserved
------------------------------------------------------------------------------
  Processor   Speed            State           CoProcessor State  Cache Size
  Number                                       State              Inst    Data
  ---------  --------   ---------------------  -----------------  ------------
      0      750  MHz   Active                 Functional         750 KB 1.5 MB
      2      750  MHz   Idle                   Functional         750 KB 1.5 MB
  Central Bus Speed (in MHz)  :        133
  Available Memory            :    1048576  KB
  Good Memory Required        :      36592  KB
   Primary boot path:    0/0/2/0.0
   Alternate boot path:  0/0/2/0.2
   Console path:         0/0/4/1.0
   Keyboard path:        0/0/4/0.0
Processor is booting from first available device.
To discontinue, press any key within 10 seconds.
Information Menu: Enter command > bo
Interact with IPL (Y, N, or Cancel)?> n
Booting...
Boot IO Dependent Code (IODC) revision 1
************* SYSTEM ALERT **************
SYSTEM NAME: uninitialized
DATE: 02/25/2008 TIME: 01:07:44
ALERT LEVEL: 6 = Boot possible, pending failure - action required
REASON FOR ALERT
SOURCE: 8 = I/O
SOURCE DETAIL: 6 = disk   SOURCE ID: 0
PROBLEM DETAIL: 0 = no problem detail

GSP卡錯誤日志:
Log Entry #   0 :
SYSTEM NAME: uninitialized
ALERT LEVEL: 8 = Boot Possible, performance impaired
SOURCE: 6 = platform
SOURCE DETAIL: 6 = service processor   SOURCE ID: 0
PROBLEM DETAIL: 1 = selftest result
CALLER ACTIVITY: 2 = operation   STATUS: 0
CALLER SUBACTIVITY: 03 = console
REPORTING ENTITY TYPE: 1 = service processor   REPORTING ENTITY ID: 00
0x7010028166002030 0B0003FF DD0C0045 type 14 = Problem Detail
0x4810028166002030 67720000 7361734D type  9 = ASCII Message        sasMgr
0x4810028166002030 78632E43 4C4F4765 type  9 = ASCII Message        LOGexc.C
0x7010028166002030 00000000 00002F35 type 14 = Problem Detail
0x70100A8166002030 0003292E 2F2A2000 type 14 = Problem Detail
Type CR for next entry, Q CR to quit.

Log Entry #   1 :
SYSTEM NAME: uninitialized
DATE: 02/22/2008 TIME: 09:14:27
ALERT LEVEL: 15 = Fatal hardware or configuration problem prevents operation
SOURCE: 8 = I/O
SOURCE DETAIL: 6 = disk   SOURCE ID: 0
PROBLEM DETAIL: 3 = functional failure
CALLER ACTIVITY: 1 = test   STATUS: 0
CALLER SUBACTIVITY: 48 = implementation dependent
REPORTING ENTITY TYPE: 0 = system firmware   REPORTING ENTITY ID: 00
0x000000F386001480 00000000 00000000 type  0 = Data Field Unused
0x580008F386001480 00006C01 16090E1B type 11 = Timestamp 02/22/2008 09:14:27

用光盤引導:
Main Menu: Enter command or menu > sea
Searching for potential boot device(s)
This may take several minutes.
To discontinue search, press any key (termination may not be immediate).

                                                                           IODC
   Path#  Device Path (dec)  Device Path (mnem)  Device Type               Rev
   -----  -----------------  ------------------  -----------               ----
   P0     0/0/2/0.0          intscsia.0          Random access media       1
   P1     0/0/2/1.0                              Random access media       1

Main Menu: Enter command or menu > bo p1
Interact with IPL (Y, N, or Cancel)?> n
Booting...
Boot IO Dependent Code (IODC) revision 1

HARD Booted.
ISL Revision A.00.43  Apr 12, 2000
ISL booting  hpux (;0):INSTALL
Boot
: disk(0/0/2/1.0.0.0.0.0.0;0):WINSTALL
8941568 + 1642496 + 2596176 start 0x1fef68


alloc_pdc_pages: Relocating PDC from 0xffff800000 to 0x3fb01000.
引導到這系統不能往下引導,請教高手幫忙,謝謝!

cjhvslhb

C2C錯誤,沒找到可啟動硬盤.
可以在10秒中斷用SEA看能不能看到硬盤先.

key_1

能找到硬盤,
Main Menu: Enter command or menu > sea
Searching for potential boot device(s)
This may take several minutes.
To discontinue search, press any key (termination may not be immediate).

                                                                           IODC
   Path#  Device Path (dec)  Device Path (mnem)  Device Type               Rev
   -----  -----------------  ------------------  -----------               ----
   P0     0/0/2/0.0          intscsia.0          Random access media       1
   P1     0/0/2/1.0                              Random access media       1

key_1

我都換了好幾塊盤了,不是盤的問題,

key_1

我查了一下L3000硬盤的PN 和我現在機器上的PN不一樣,PN不一樣應該能用吧,

marty.xu

硬盤應該可以用的，help看下你的firmware版本，然后看下你的console path，只能一步一步排除了

key_1

具體怎么排除還請大俠指教,硬盤的firmware怎么查看,怎么升級firmware呢

jingguo_yue

建議去十妙中斷看看設備的硬件信息,我覺得不像是硬盤的問題,有可能是內存或者主板的問題.

\"alloc_pdc_pages: Relocating PDC from 0xffff800000 to 0x3fb01000.\"

pdc引導失敗.

marty.xu

呵呵，我不是說硬盤firmware，我指GSP的，你在GSP下issue command:help

marty.xu

通過help可以看到GSP的版本，你告訴我是多少