glibc sudo make install 后cannot find -lnss_test1

jerrybond

弄了一天了，想安裝個glibc， 看C庫原碼  make 過 ，make test 不過
http://www.72891.cn/thread-3585196-1-1.html
http://www.linuxsir.org/bbs/thread379336.html
最后實在無奈sudo make install (硬裝) 結果如下
CC="gcc" /usr/bin/perl scripts/test-installation.pl /usr/src/glibc-build/
/usr/bin/ld: cannot find -lnss_test1
collect2: ld returned 1 exit status
Execution of gcc failed!
The script has found some problems with your installation!
Please read the FAQ and the README file and check the following:
- Did you change the gcc specs file (necessary after upgrading from
  Linux libc5)?
- Are there any symbolic links of the form libXXX.so to old libraries?
  Links like libm.so -> libm.so.5 (where libm.so.5 is an old library) are wrong,
  libm.so should point to the newly installed glibc file - and there should be
  only one such link (check e.g. /lib and /usr/lib)
You should restart this script from your build directory after you've
fixed all problems!
Btw. the script doesn't work if you're installing GNU libc not as your
primary library!
make[1]: *** [install] Error 1
make[1]: Leaving directory `/usr/src/glibc'
make: *** [install] 錯誤 2
各位大俠，幫解決一下看庫源碼的問題吧。謝謝

renxiao2003

這個是不是不對啊。你安裝glibc沒但沒有安裝源碼庫怎么看。

jerrybond

這個是不是不對啊。你安裝glibc沒但沒有安裝源碼庫怎么看。
renxiao2003 發表于 2011-08-23 07:23

    怎么安裝源碼庫，請?jiān)敿?xì)說下。

renxiao2003

一般來說，發行版都有源碼光盤的。

jerrybond

一般來說，發行版都有源碼光盤的。
renxiao2003 發表于 2011-08-23 08:38

    我是從網絡安裝的Debian,源碼包叫啥名字？

renxiao2003

回復 5# jerrybond


    那應該也能有源碼安裝的。查找一下。