IO::Epoll模塊安裝出錯!求助!

heidern

我想嘗試一下epoll,但在cpan安裝IO::Epoll的時候test出錯:

1. [root@CentOS64 tmp]# /usr/local/perl5.12/bin/cpan IO::Epoll
   
2. Going to read '/root/.cpan/Metadata'
   
3.   Database was generated on Tue, 12 Jul 2011 17:27:35 GMT
   
4. Running install for module 'IO::Epoll'
   
5. Running make for B/BR/BRUCEK/IO-Epoll-0.02.tar.gz
   
6. Checksum for /root/.cpan/sources/authors/id/B/BR/BRUCEK/IO-Epoll-0.02.tar.gz ok
   
7. 
   
8.   CPAN.pm: Going to build B/BR/BRUCEK/IO-Epoll-0.02.tar.gz
   
9. 
   
10. Checking if your kit is complete...
    
11. Looks good
    
12. Writing Makefile for IO::Epoll
    
13. cp lib/IO/Epoll.pm blib/lib/IO/Epoll.pm
    
14. AutoSplitting blib/lib/IO/Epoll.pm (blib/lib/auto/IO/Epoll)
    
15. /usr/local/perl5.12/bin/perl /usr/local/perl5.12/lib/5.12.3/ExtUtils/xsubpp  -typemap /usr/local/perl5.12/lib/5.12.3/ExtUtils/typemap  Epoll.xs > Epoll.xsc && mv Epoll.xsc Epoll.c
    
16. Please specify prototyping behavior for Epoll.xs (see perlxs manual)
    
17. cc -c  -I. -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2   -DVERSION=\"0.02\" -DXS_VERSION=\"0.02\" -fPIC "-I/usr/local/perl5.12/lib/5.12.3/x86_64-linux-thread-multi/CORE"   Epoll.c
    
18. In file included from Epoll.xs:5:
    
19. ppport.h:231:1: warning: "PERL_UNUSED_DECL" redefined
    
20. In file included from Epoll.xs:2:
    
21. /usr/local/perl5.12/lib/5.12.3/x86_64-linux-thread-multi/CORE/perl.h:308:1: warning: this is the location of the previous definition
    
22. Running Mkbootstrap for IO::Epoll ()
    
23. chmod 644 Epoll.bs
    
24. rm -f blib/arch/auto/IO/Epoll/Epoll.so
    
25. cc  -shared -O2 -L/usr/local/lib -fstack-protector Epoll.o  -o blib/arch/auto/IO/Epoll/Epoll.so         \
    
26.                 \
    
27.          
    
28. chmod 755 blib/arch/auto/IO/Epoll/Epoll.so
    
29. cp Epoll.bs blib/arch/auto/IO/Epoll/Epoll.bs
    
30. chmod 644 blib/arch/auto/IO/Epoll/Epoll.bs
    
31. Manifying blib/man3/IO::Epoll.3
    
32.   BRUCEK/IO-Epoll-0.02.tar.gz
    
33.   /usr/bin/make -- OK
    
34. Running make test
    
35. PERL_DL_NONLAZY=1 /usr/local/perl5.12/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
    
36. t/IO-Epoll.t ......... Can't load '/root/.cpan/build/IO-Epoll-0.02-KvJKWF/blib/arch/auto/IO/Epoll/Epoll.so' for module IO::Epoll: /root/.cpan/build/IO-Epoll-0.02-KvJKWF/blib/arch/auto/IO/Epoll/Epoll.so: undefined symbol: epoll_pwait at /usr/local/perl5.12/lib/5.12.3/x86_64-linux-thread-multi/DynaLoader.pm line 200.
    
37. at t/IO-Epoll.t line 13
    
38. Compilation failed in require at t/IO-Epoll.t line 13.
    
39. BEGIN failed--compilation aborted at t/IO-Epoll.t line 13.
    
40. t/IO-Epoll.t ......... Dubious, test returned 2 (wstat 512, 0x200)
    
41. Failed 9/9 subtests
    
42. t/IO-Poll-compat.t ... Can't load '/root/.cpan/build/IO-Epoll-0.02-KvJKWF/blib/arch/auto/IO/Epoll/Epoll.so' for module IO::Epoll: /root/.cpan/build/IO-Epoll-0.02-KvJKWF/blib/arch/auto/IO/Epoll/Epoll.so: undefined symbol: epoll_pwait at /usr/local/perl5.12/lib/5.12.3/x86_64-linux-thread-multi/DynaLoader.pm line 200.
    
43. at t/IO-Poll-compat.t line 23
    
44. Compilation failed in require at t/IO-Poll-compat.t line 23.
    
45. BEGIN failed--compilation aborted at t/IO-Poll-compat.t line 23.
    
46. t/IO-Poll-compat.t ... Dubious, test returned 2 (wstat 512, 0x200)
    
47. No subtests run
    
48. t/IO-Ppoll-compat.t .. Can't load '/root/.cpan/build/IO-Epoll-0.02-KvJKWF/blib/arch/auto/IO/Epoll/Epoll.so' for module IO::Epoll: /root/.cpan/build/IO-Epoll-0.02-KvJKWF/blib/arch/auto/IO/Epoll/Epoll.so: undefined symbol: epoll_pwait at /usr/local/perl5.12/lib/5.12.3/x86_64-linux-thread-multi/DynaLoader.pm line 200.
    
49. at t/IO-Ppoll-compat.t line 7
    
50. Compilation failed in require at t/IO-Ppoll-compat.t line 7.
    
51. BEGIN failed--compilation aborted at t/IO-Ppoll-compat.t line 7.
    
52. # Looks like your test exited with 2 before it could output anything.
    
53. t/IO-Ppoll-compat.t .. Dubious, test returned 2 (wstat 512, 0x200)
    
54. Failed 10/10 subtests
    
55. 
    
56. Test Summary Report
    
57. -------------------
    
58. t/IO-Epoll.t       (Wstat: 512 Tests: 0 Failed: 0)
    
59.   Non-zero exit status: 2
    
60.   Parse errors: Bad plan.  You planned 9 tests but ran 0.
    
61. t/IO-Poll-compat.t (Wstat: 512 Tests: 0 Failed: 0)
    
62.   Non-zero exit status: 2
    
63.   Parse errors: No plan found in TAP output
    
64. t/IO-Ppoll-compat.t (Wstat: 512 Tests: 0 Failed: 0)
    
65.   Non-zero exit status: 2
    
66.   Parse errors: Bad plan.  You planned 10 tests but ran 0.
    
67. Files=3, Tests=0,  0 wallclock secs ( 0.02 usr  0.00 sys +  0.07 cusr  0.00 csys =  0.09 CPU)
    
68. Result: FAIL
    
69. Failed 3/3 test programs. 0/0 subtests failed.
    
70. make: *** [test_dynamic] Error 2
    
71.   BRUCEK/IO-Epoll-0.02.tar.gz
    
72.   /usr/bin/make test -- NOT OK
    
73. //hint// to see the cpan-testers results for installing this module, try:
    
74.   reports BRUCEK/IO-Epoll-0.02.tar.gz
    
75. Running make install
    
76.   make test had returned bad status, won't install without force

復制代碼

flw

所以 Perl 程序員也要懂 C 語言，懂系統調用。遇到這種問題直接人擋殺人佛擋殺佛，逢山開路遇水搭橋，該改什么直接 vim 一下就改了。

flw

/root/.cpan/build/IO-Epoll-0.02-KvJKWF/blib/arch/auto/IO/Epoll/Epoll.so: undefined symbol: epoll_pwait at /usr/local/perl5.12/lib/5.12.3/x86_64-linux-thread-multi/DynaLoader.pm line 200.

這個應該是錯誤的根源。
看起來像是 configure 的問題。

moxnet

這個在我的FreeBSD上編譯也通不過.

這個東西依賴系統, 不知道你的系統是否滿足他的要求?

在他的readme中說:

The epoll(4) subsystem is a new, (currently) Linux-specific variant of
poll(2).  It is designed to offer O(1) scalability over large numbers of
watched file descriptors.  You will need at least version 2.5.44 of Linux
to use this module, and you might need to upgrade your C library.

cnncc

我想嘗試一下epoll,但在cpan安裝IO::Epoll的時候test出錯:
heidern 發表于 2011-07-13 18:28

epoll_pwait 需要 2.6.19 以上的內核才能支持，目前 RHEL/CentOS 5.6 以下版本都是 2.6.18，你直接用 force 強制安裝就可以了，不會有問題的，我們目前就是這樣用的。

但是要注意，程序里面不要調用 epoll_pwait 就可以了！

heidern

epoll_pwait 需要 2.6.19 以上的內核才能支持，目前 RHEL/CentOS 5.6 以下版本都是 2.6.18，你直接用 ...
cnncc 發表于 2011-07-14 11:04

    正解,謝謝!