2.6模塊編譯時遇到的問題，插入時N多符號找不到

arethe

我想將一個本來為2.4內核開發的模塊移到2.6內核上，修改了入口函數和Makefile后，編譯能通過，但插入時報出很多符號找不到，dmesg如下：
［code]
plc: Unknown symbol __eqdf2
plc: Unknown symbol __fixsfsi
plc: Unknown symbol __gtdf2
plc: Unknown symbol __floatsidf
plc: Unknown symbol __ltdf2
plc: Unknown symbol Logic
plc: Unknown symbol __extendsfdf2
plc: Unknown symbol __adddf3
plc: Unknown symbol __fixdfsi
plc: Unknown symbol __ledf2
plc: Unknown symbol __floatsisf
plc: Unknown symbol __divdf3
plc: Unknown symbol __muldf3
plc: Unknown symbol __truncdfsf2
plc: Unknown symbol __nedf2
plc: Unknown symbol _GLOBAL_OFFSET_TABLE_
plc: Unknown symbol __gedf2
plc: Unknown symbol __subdf3
plc: Unknown symbol __addsf3
[/code]

Makefile 如下：

1. 
   
2. MODULE_FOR_RTL = RTMain.o File.o Tools.o Hardware.o Logic.o
   
3. EXTRA_CFLAGS := -DHAVE_RTAI -I$(RTAI_DIR)/include -I$(KERNEL_DIR)/include -DMODULE -D__KERNEL__ -DLINUX -DRTAI -Drtai -I/usr/include -L/usr/lib/gcc/i386-redhat-linux/4.1.2/ -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
   
4. 
   
5.    obj-m := plc.o
   
6.    plc-y := $(MODULE_FOR_RTL) libgcc.a
   
7.    KERNELDIR := /usr/src/linux
   
8.    PWD := $(shell pwd)
   
9. 
   
10. all:
    
11.         $(MAKE) -C $(KERNELDIR) M=$(PWD) modules
    
12.         $(LD) -r -o PLC_MODULE.ko plc.ko libgcc.a -L/usr/lib
    
13. 
    

復制代碼

請問這些符號是那個庫文件里的？我的Makefile是否有問題？