安裝完操作系統后，系統無法啟動

freedomjiang

SUN E6900安裝 solaris 10 后，無法從硬盤正常啟動，各位看一下是怎么回事。

Sun Fire E6900
OpenFirmware version 5.20.14 (11/13/09 04:51)
Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
SmartFirmware, Copyright (C) 1996-2001.  All rights reserved.
16384 MB memory installed, Serial #50827598.
Ethernet address 0:3:ba:7:91:4e, Host ID: 8307914e.
Rebooting with command: boot
SunOS Release 5.10 Version Generic_141444-09 64-bit
Copyright 1983-2009 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
NOTICE: /: bad dir ino 4046 at offset 68: mangled entry
NOTICE: /: unexpected free inode 786463, run fsck(1M)
NOTICE: /: unexpected free inode 786463, run fsck(1M)
WARNING: Cannot mount /system/contract
NOTICE: /: unexpected free inode 786463, run fsck(1M)
NOTICE: /: unexpected free inode 786463, run fsck(1M)
WARNING: Cannot mount /proc
NOTICE: /: unexpected free inode 786463, run fsck(1M)
NOTICE: /: unexpected free inode 786463, run fsck(1M)
WARNING: Cannot mount /etc/mnttab
NOTICE: /: bad dir ino 77 at offset 2080: mangled entry
NOTICE: /: unexpected free inode 786463, run fsck(1M)
NOTICE: /: unexpected free inode 786463, run fsck(1M)
WARNING: Cannot mount /etc/svc/volatile



krtld: invalid relocation type 393225 at 0x133c: file=/platform/sun4u/kernel/drv/sparcv9/mc-us3
krtld: invalid relocation type 393225 at 0x133c: file=/platform/sun4u/kernel/drv/sparcv9/mc-us3
krtld: invalid relocation type 393225 at 0x133c: file=/platform/sun4u/kernel/drv/sparcv9/mc-us3
krtld: invalid relocation type 393225 at 0x133c: file=/platform/sun4u/kernel/drv/sparcv9/mc-us3
krtld: invalid relocation type 393225 at 0x133c: file=/platform/sun4u/kernel/drv/sparcv9/mc-us3
krtld: invalid relocation type 393225 at 0x133c: file=/platform/sun4u/kernel/drv/sparcv9/mc-us3
krtld: invalid relocation type 393225 at 0x133c: file=/platform/sun4u/kernel/drv/sparcv9/mc-us3
krtld: invalid relocation type 393225 at 0x133c: file=/platform/sun4u/kernel/drv/sparcv9/mc-us3
krtld: invalid relocation type 393225 at 0x133c: file=/platform/sun4u/kernel/drv/sparcv9/mc-us3
krtld: invalid relocation type 393225 at 0x133c: file=/platform/sun4u/kernel/drv/sparcv9/mc-us3
krtld: invalid relocation type 393225 at 0x133c: file=/platform/sun4u/kernel/drv/sparcv9/mc-us3

在 ok 狀態下 boot cdrom -s ，
Sun Fire E6900
OpenFirmware version 5.20.14 (11/13/09 04:51)
Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
SmartFirmware, Copyright (C) 1996-2001.  All rights reserved.
16384 MB memory installed, Serial #50827598.
Ethernet address 0:3:ba:7:91:4e, Host ID: 8307914e.
Rebooting with command: boot cdrom -s
TL = 1, TT = 64. ERROR: Fast Instruction Access MMU Miss
TSTATE= 0x1400 [ccr = 0x0, asi = 0x0, pstate = 0x14, cwp = 0x0]
TPC= 0000000041496558
TNPC= 0000000021154514
SFSR= 0000000000808008, TAGACCESS = 0000000041496000
TICK= 8000000c358d2818, TICKCMP = 8000000000000000
debugger entered.

直接boot -s
un Fire E6900
OpenFirmware version 5.20.14 (11/13/09 04:51)
Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
SmartFirmware, Copyright (C) 1996-2001.  All rights reserved.
16384 MB memory installed, Serial #50827598.
Ethernet address 0:3:ba:7:91:4e, Host ID: 8307914e.
Rebooting with command: boot -s
SunOS Release 5.10 Version Generic_141444-09 64-bit
Copyright 1983-2009 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
WARNING: /ssm@0,0/pci@1c,700000/pci@1/scsi@2/sd@0,0 (sd1):
        Corrupt label - label checksum failed
Cannot mount root on /ssm@0,0/pci@1c,700000/pci@1/scsi@2/disk@0,0:a fstype ufs
panic[cpu20]/thread=180e000: vfs_mountroot: cannot mount root
000000000180b950 genunix:vfs_mountroot+358 (800, 200, 0, 18ecc00, 1915400, 1946400)
  %l0-3: 00000000010c1800 00000000010c1a0c 00000000018f2578 00000000011f4400
  %l4-7: 00000000011f4000 0000000001948800 0000000000000600 0000000000000200
000000000180ba10 genunix:main+9c (14, 180c000, 188e970, 1835df8, 183c248, 1938c00)
  %l0-3: 000000000180c000 000000000180c000 0000000070002000 0000000000000002
  %l4-7: 0000000001897000 0000000000000014 000000000180c000 0000000000000001

michael1983

是不是裝的時候沒裝好？

freedomjiang

Solaris 10 software installation succeeded

Customizing system files
        - Mount points table (/etc/vfstab)
        - Unselected disk mount points (/var/sadm/system/data/vfstab.unselected)
        - Network host addresses (/etc/hosts)
        - Environment variables (/etc/default/init)

Cleaning devices

Customizing system devices
        - Physical devices (/devices)
        - Logical devices (/dev)

Installing boot information
        - Installing boot blocks (c1t0d0s0)
        - Installing boot blocks (/dev/rdsk/c1t0d0s0)
        - Updating system firmware for automatic rebooting

Installation log location
        - /a/var/sadm/system/logs/install_log (before reboot)
        - /var/sadm/system/logs/install_log (after reboot)

Installation complete
Executing SolStart postinstall phase...
Executing finish script "patch_finish"...


Finish script patch_finish execution completed.
Executing JumpStart postinstall phase...

The begin script log 'begin.log'
is located in /var/sadm/system/logs after reboot.

The finish script log 'finish.log'
is located in /var/sadm/system/logs after reboot.


Launching installer. Please Wait...



Installing Additional Software
|-1%--------------25%-----------------50%-----------------75%--------------100%|

   Pausing for 30 seconds at the "Summary" screen. The wizard will continue to
   the next step unless you select "Pause". Enter 'p' to pause. Enter 'c' to
   continue. [c] c


   Pausing for 90 seconds at the "Reboot" screen. The wizard will continue to
   the next step unless you select "Pause". Enter 'p' to pause. Enter 'c' to
   continue. [c] c

Creating boot_archive for /a
updating /a/platform/sun4u/boot_archive
15+0 records in
15+0 records out
syncing file systems... done
rebooting...
Resetting ...

freedomjiang

應該不會有啥問題

風之幻想

用光盤啟動單用戶。把你的硬盤mount起來看看狀況。

easybegin

看E6900自建過程是否有報錯

easybegin

然后boot cdrom -s看硬盤是否有報錯。

doging

{:3_200:}

yuhuohu

然后boot cdrom -s看硬盤是否有報錯。
easybegin 發表于 2010-04-19 14:31

    各位 lz cdrom也起不了哦

Rebooting with command: boot cdrom -s
TL = 1, TT = 64. ERROR: Fast Instruction Access MMU Miss

是內存/插槽問題嗎

easybegin

最大化自檢一下吧