sun n1280的panic 請高手分析下是什么問題

adambbs

Netra 1280
OpenFirmware version 5.20.7 (08/03/07 06:11)
Copyright 2007 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
SmartFirmware, Copyright (C) 1996-2001.  All rights reserved.
16384 MB memory installed, Serial #76516714.
Ethernet address 0:14:4f:8f:8d:6a, Host ID: 848f8d6a.



SunOS Release 5.10 Version Generic_138888-01 64-bit
Copyright 1983-2008 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        SCSI bus DT DATA IN phase parity error
WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        Target 0 reducing sync. transfer rate
WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        Connected command timeout for Target 0.0
WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        Target 0 disabled wide SCSI mode
WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        Target 0 reverting to async. mode
WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        got SCSI bus reset
WARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):
        auto request sense failed (reason=timeout)

WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        Resetting scsi bus, got incorrect phase from (0,0)
WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        got SCSI bus reset
WARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):
        auto request sense failed (reason=reset)

WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        Resetting scsi bus, got incorrect phase from (0,0)
WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        got SCSI bus reset
WARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):
        auto request sense failed (reason=reset)

WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        Resetting scsi bus, got incorrect phase from (0,0)
WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        got SCSI bus reset
WARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):
        auto request sense failed (reason=reset)

WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        Resetting scsi bus, got incorrect phase from (0,0)
WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        got SCSI bus reset
WARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):
        auto request sense failed (reason=reset)

WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        Resetting scsi bus, got incorrect phase from (0,0)
WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        got SCSI bus reset
WARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):
        auto request sense failed (reason=reset)

WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        Resetting scsi bus, got incorrect phase from (0,0)
WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        got SCSI bus reset
WARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):
        auto request sense failed (reason=reset)

WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        Resetting scsi bus, got incorrect phase from (0,0)
WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        got SCSI bus reset
WARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):
        auto request sense failed (reason=reset)

WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        Resetting scsi bus, got incorrect phase from (0,0)
WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        got SCSI bus reset
WARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):
        auto request sense failed (reason=reset)

WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        Resetting scsi bus, got incorrect phase from (0,0)
WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        got SCSI bus reset
WARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):
        auto request sense failed (reason=reset)

WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        Resetting scsi bus, got incorrect phase from (0,0)
WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        got SCSI bus reset
WARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):
        auto request sense failed (reason=reset)

WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        Resetting scsi bus, got incorrect phase from (0,0)
WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        got SCSI bus reset
WARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):
        auto request sense failed (reason=reset)

WARNING: Error reading ufs log
WARNING: ufs log for / changed state to Error
WARNING: Please umount(1M) / and run fsck(1M)
WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        Resetting scsi bus, got incorrect phase from (0,0)
WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        got SCSI bus reset
WARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):
        auto request sense failed (reason=reset)

WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        Resetting scsi bus, got incorrect phase from (0,0)
WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        got SCSI bus reset
WARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):
        auto request sense failed (reason=reset)

WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        Resetting scsi bus, got incorrect phase from (0,0)
WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        got SCSI bus reset
WARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):
        auto request sense failed (reason=reset)

WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        Resetting scsi bus, got incorrect phase from (0,0)
WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        got SCSI bus reset
WARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):
        auto request sense failed (reason=reset)

WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        Resetting scsi bus, got incorrect phase from (0,0)
WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        got SCSI bus reset
WARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):
        auto request sense failed (reason=reset)

WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        Resetting scsi bus, got incorrect phase from (0,0)
WARNING: /ssm@0,0/pci@18,600000/scsi@2 (glm0):
        got SCSI bus reset
WARNING: /ssm@0,0/pci@18,600000/scsi@2/sd@0,0 (sd0):
        auto request sense failed (reason=reset)
boot /ssm@0,0/pci@18,600000/scsi@2/disk@0,0:f
Cannot mount root on /ssm@0,0/pci@18,600000/scsi@2/disk@0,0:a fstype ufs

panic[cpu0]/thread=180e000: vfs_mountroot: cannot mount root

000000000180b950 genunix:vfs_mountroot+358 (800, 200, 0, 18e7c00, 1911800, 193c400)
  %l0-3: 00000000010bc400 00000000010bc310 00000000018ed9b8 00000000011e9000
  %l4-7: 00000000011e9000 000000000193e800 0000000000000600 0000000000000200
000000000180ba10 genunix:main+a0 (1835c58, 180c000, 1887c40, 1939000, 183c058, 1835800)
  %l0-3: 0000000001015400 0000000000000001 0000000070002000 0000000000000000
  %l4-7: 0000000001890400 0000000000000000 000000000180c000 0000000000000000

skipping system dump - no dump device configured
rebooting...

wd302

這還分析什么，vxvm文件系統已經壞了，拆了再啟動吧

doging

mount root分區失敗，所以panic，檢查硬盤吧

nimysun

應該是硬件問題，首先更換硬盤吧

adambbs

sun 第一次建議更換硬盤，更換硬盤后，發現問題依舊。 然后就更換了硬盤背板。系統就一切正常了。

byuq

明顯的SCSI通道故障，首先考慮最容易更換的部件硬盤，然后考慮更換硬盤背板，最后考慮更換SCSI芯片所在的PCI I/O Board and System Controller。

alex_xie

硬盤壞了.

lqiao

回復 1# adambbs


   這個panic就是一個簡單的硬件問題，如果有panic的復雜問題請先配置好dumpdevice，然后收集coredump，否則貼出來的這點信息根本就不夠分析。

jerry_lee

這還分析什么，vxvm文件系統已經壞了，拆了再啟動吧
wd302 發表于 2010-03-27 13:14

一看就知道是高手，撒尿不按球，呵呵。