在EMC AX4-5i配置ISCSI遇到問題

wufeiwf

我新買的一臺DELL EMCAX4-5i存儲，想配置存儲的iscsi的端口信息，但是我的navisphere manager的管理界面上沒有任何關于iscsi的菜單功能項，只有和存儲管理相關的，如raid，lun，host，physical等，就是在右鍵的功能中找不到任何和iscsi有關的選項，navisphere manager是6.26.20.1.9，是還需要在存儲上面安裝什么軟件嗎？兩個控制器都是iscsi的。

[ 本帖最后由 wufeiwf 于 2009-1-7 14:43 編輯 ]

wufeiwf

查了半天的官方文檔發現寫配置iscsi步驟很簡單：


Configuring iSCSI ports on the storage system  
Before the host can perform I/O to the iSCSI storage system, you must configure the network parameters for the storage system and host iSCSI ports.

1
In the Storage tree, right-click the icon for an iSCSI storage system and click iSCSI > Port Management.

The Port Management dialog box list all the iSCSI ports on the storage system, and when available, lists the port's IP address and the name of the initiator connected to this port

2
Select the port whose network parameters you want to enter or modify, and click Properties.

3
In the iSCSI Port Properties dialog box, for the selected port, enter the IP address, Gateway, and  Subnet Mask..

Important  
Consult with your Network Manager to determine the correct settings before changing MTU settings. Changing the port properties may disrupt iSCSI traffic to all ports on this SP or result in intermittent operation. Use the Connectivity Status dialog to identify and check the status of all connections to ports on this SP. Initiator configuration changes may be necessary to regain connections.

Do not enable the Require Initiator Authentication check box until you have set the network parameters for the server initiator iSCSI ports.

4
Click Apply to save the settings and return to the Port Management dialog box.

5
Repeat the process to set the network parameters for any other iSCSI SP ports.


但是我在manager中把所有的右鍵菜單找了一個遍也沒有發現有iscsi的菜單項:em11:

wufeiwf

有在另外一個幫助中查到：
Configuring iSCSI credentials on the initiator storage system
Assign credentials to the iSCSI initiator storage system if you will be configuring connections sets that use the shared credentials option.  With the Shared option, the initiator storage system credentials are automatically assigned to the connection set.

Note  In order for the target storage system to be able to authenticate the storage system initiators in the connection set , you must enable Require initiator authentication for the participating ports on the target storage system.

1
Select Use shared credentials to make the Shared Credentials options visible.

2
In Shared credentials, enter the required information for User Name, Secret, and Secret Type.

Click Help in the dialog box for detailed information for each option.

3
Click OK to assign the credentials to the storage system.

因?yàn)榇鎯?chǔ)的初始化是來安裝的工程師弄的，當時我沒有看，難道是在初始化的時候需要文檔中說到的證書？

wufeiwf

哪位老大配置過，給哥們點提示，謝謝了。

wufeiwf

官方的資料和軟件都看了半天了，沒有看出頭緒來，在線等...

deadwind

AX4-5不是使用navisphere express么？怎么是navisphere manager呢，我記得CX3/4才用manager吧
左邊有iSCSI的菜單啊

[ 本帖最后由 deadwind 于 2009-1-7 22:44 編輯 ]

redwaves

就那么幾個菜單，點開看一下就知道了

cncqpansky

檢測你在3樓說的initiator安裝配置吧, 搞不好是DELL ISP美給你配置好咯,,,,,

wufeiwf

原帖由 deadwind 于 2009-1-7 22:39 發表
AX4-5不是使用navisphere express么？怎么是navisphere manager呢，我記得CX3/4才用manager吧
左邊有iSCSI的菜單啊

高版本的都采用manager了，和cx系列的瀏覽器管理界面一樣，我這里安裝的時候就是manager的界面，版本是6.26.20.現在我是懷疑初始化的時候有區別，但是有誰遇到過嗎？

wufeiwf

原帖由 redwaves 于 2009-1-8 13:37 發表
就那么幾個菜單，點開看一下就知道了

老大，你這話說的，那么點英文我還是能看懂，而且我眼神還湊合，