rp5430了主機啟動不了，報錯如下

messages

ＲＰ５４３０的主機，啟動了到10中斷時就不動了，前面板亮紅燈，console進入ＧＳＰ看到錯誤提示如下：


************ EARLY BOOT VFP *************
End of early boot detected
*****************************************

Firmware Version  43.22

Duplex Console IO Dependent Code (IODC) revision 1

------------------------------------------------------------------------------
   (c) Copyright 1995-2002, Hewlett-Packard Company, All rights reserved
------------------------------------------------------------------------------

  Processor   Speed            State           CoProcessor State  Cache Size
  Number                                       State              Inst    Data
  ---------  --------   ---------------------  -----------------  ------------
      0      875  MHz   Active                 Functional         750 KB 1.5 MB
      2      875  MHz   Idle                   Functional         750 KB 1.5 MB

  Central Bus Speed (in MHz)  :        133  
  Available Memory            :    8388608  KB
  Good Memory Required        :      31676  KB

   Primary boot path:    0/0/1/1.2           
   Alternate boot path:  0/0/2/0.2           
   Console path:         0/0/4/1.0           
   Keyboard path:        0/0/4/0.0           


Processor is booting from first available device.

To discontinue, press any key within 10 seconds.

10 seconds expired.
Proceeding...

Trying Primary Boot Path
------------------------
Booting...
Boot IO Dependent Code (IODC) revision 1

IPL error: bad LIF magic.
.... FAILED.


Trying Alternate Boot Path
--------------------------

Failed to initialize.

ENTRY_INIT
Status = -7

00000000 FFFFFFF9 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000012 00000000 00000000 00000000 00000000
00000000 454E4841 00000000 00000000 00000000 00000000 00000000 454E4841
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000200 00000000 00000000 00000000 00000000 00000000 00000000

Failed to initialize.

.... FAILED.


Terminating selection process.
No boot device found.


---- Main Menu ----------------------------------------
************* SYSTEM ALERT **************
SYSTEM NAME: rp5430
DATE: 05/05/2008 TIME: 23:56:46
ALERT LEVEL: 15 = Fatal hardware or configuration problem prevents operation

REASON FOR ALERT
SOURCE: 8 = I/O
SOURCE DETAIL: 6 = disk   SOURCE ID: 0
PROBLEM DETAIL: 3 = functional failure

LEDs:  RUN      ATTENTION     FAULT     REMOTE     POWER
       FLASH    FLASH         ON        ON         ON
LED State: Boot Failed.  Running non-OS code.  Non-critical error detected.
Check Chassis and Console Logs for error messages.

0x000000F386001480 00000000 00000000 - type  0 = Data Field Unused
0x580008F386001480 00006C04 0517382E - type 11 = Timestamp 05/05/2008 23:56:46
A: ack read of this entry - X: Disable all future alert messages
Anything else skip redisplay the log entry
->Choice:Timeout!
*****************************************

在這里就停住了，進入了menu＞
但是只要你boot系統就可以正常進入．
問題在哪呢？
是不是要修改主機為自動啟動，但是我看了co-auto項卻全部是on的.
ＧＳＰ報錯如下：
Log Entry #   0 :
SYSTEM NAME: rp5430
DATE: 05/05/2008 TIME: 23:56:46
ALERT LEVEL: 15 = Fatal hardware or configuration problem prevents operation

SOURCE: 8 = I/O
SOURCE DETAIL: 6 = disk   SOURCE ID: 0
PROBLEM DETAIL: 3 = functional failure

CALLER ACTIVITY: 1 = test   STATUS: 0
CALLER SUBACTIVITY: 48 = implementation dependent
REPORTING ENTITY TYPE: 0 = system firmware   REPORTING ENTITY ID: 00

0x000000F386001480 00000000 00000000 type  0 = Data Field Unused
0x580008F386001480 00006C04 0517382E type 11 = Timestamp 05/05/2008 23:56:46

以下是提示sytem firmware出錯嗎？
REPORTING ENTITY TYPE: 0 = system firmware   REPORTING ENTITY ID: 00

messages

進入操作系統后直接reboot就沒問題，但是shutdown -h0
gsp> pc off
gsp>pc on 就會報以上的錯誤

五“宅”一生

LIF啟動文件壞了，到維護模式下修復看看。

messages

剛剛重裝了操作系統也報那個錯

五“宅”一生

不會吧。是不是你的安裝介質出了問題。換個看看。

messages

安裝的介質有問題?這個倒沒想過,折騰了兩天了,重裝了3次了,也換了槽位,換了硬盤.
上網查了好多資料IPL error: bad LIF magic.的錯誤大家都是說用光盤來恢復就可以,但是奇怪的問題是我用光盤恢復會報錯.
                  HP-UX Recovery MENU

        Select one of the following:
        a.  Mount the root disk and exit to a shell only.
        b.  Recover the bootlif/os partitions.
        c.  Replace the kernel on the root file system.
        d.  Both Options: b and c
        v.  Read information about LVM Recovery (LVM.RECOVER)

        m.  Return to 'HP-UX Recovery Media Main Menu'.
        x.  Exit to the shell.

    Use this menu to select the level of recovery desired.

    Selection: b
Entering boot area repairing ....

/: write failed, file system is full
ERROR:   tar: ./sbin/mkboot: HELP - extract write error: No space left on
         device (errno = 2
/: file system full
NOTE:    Retrying loadfile command...


                         BOOTLIF PATH VERIFICATION
                                   MEN

     This menu must be used to determine the path to the bootlif (ISL, HPUX
     and the AUTO file).
     When the information is correct, select 'a'.

        INFORMATION to verify:
             Path to the bootlif is 0/0/2/0.2.0

        Select one of the following:
             a.  The above information is correct.
             b.  WRONG!!Prompt user for a new bootlif path.

             m.  Return to the 'HP-UX Recovery MENU.'
             x.  Exit to the shell.

Selection: a

*********** Installing bootlif  ***********

/duped_root/.kshrc: mkboot: cannot execute
\ mkboot failed.



         Mkboot failed to update the bootlif!!
         You will be returned to the HP-UX Recovery MENU

         <ress return to continue>

messages

換了一張光盤進行 Recover the bootlif/os partitions,還是一樣,報同樣的錯,這張光盤安裝了的系統在另一臺主機上運行是正常的.
郁悶啊!!!
為什么系統執行reboot沒有問題,但是執行shutdown -h 0,pc-off,pc-on就會出錯呢.百思不得其解,高手幫忙啊..謝謝!
這個星期搞不定就慘了...

[ 本帖最后由 messages 于 2008-5-8 18:01 編輯 ]

五“宅”一生

是不是機器的硬件出了問題。或者真是firmware需要升級了。我覺得你需要咨詢一下800。

levine

/: write failed, file system is full
怎么不看錯誤信息呢，/文件系統滿了，很多事都干不了的。。。

messages

原帖由 levine 于 2008-5-9 22:18 發表
/: write failed, file system is full
怎么不看錯誤信息呢，/文件系統滿了，很多事都干不了的。。。

/文件系統是37%.如下,剛剛重裝的操作系統,不過我也不知道為什么用光盤啟動做recorver時會提示 / is full
# bdf
Filesystem          kbytes    used   avail %used Mounted on
/dev/vg00/lvol3     262144   95320  165584   37% /
/dev/vg00/lvol1     314736   30856  252400   11% /stand
/dev/vg00/lvol8    4718592  293768 4390912    6% /var
/dev/vg00/lvol7    1310720  920232  387448   70% /usr
/dev/vg00/lvol4     262144    2368  257752    1% /tmp
/dev/vg00/lvol6    3211264 2270664  933288   71% /opt
/dev/vg00/lvol5      65536    2280   62776    4% /home
#
系統如果在menu>下鍵入boot是可以正常進入的,問題是在斷電后重啟才會出現bad lif的錯誤.
今天又找了另一張光盤進入安裝后,出現的問題還是一樣.

[ 本帖最后由 messages 于 2008-5-11 16:53 編輯 ]