亚洲av成人无遮挡网站在线观看,少妇性bbb搡bbb爽爽爽,亚洲av日韩精品久久久久久,兔费看少妇性l交大片免费,无码少妇一区二区三区

<u id="zzerh"></u>

Chinaunix

標題: linux 2.4+tsm 5.2 +ESL9322配置出錯 [打印本頁]

作者: 芙蓉王 時間: 2007-08-28 21:09
標題: linux 2.4+tsm 5.2 +ESL9322配置出錯
linux服務器連接盤陣和帶庫
1. 安裝了光纖卡驅動，HP Supported Emulex HBA Driver for 2.4 kernels
2. 查看
＃cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 15 Lun: 00
  Vendor: COMPAQ Model: PROLIANT 4L8I Rev: N188
  Type: Processor                      ANSI SCSI revision: 02
。。。。。。（同上）
Host: scsi2 Channel: 00 Id: 04 Lun: 00
  Vendor: COMPAQ Model: NS ROUTER E1200  Rev: 568c
  Type: Unknown                         ANSI SCSI revision: 04
Host: scsi2 Channel: 00 Id: 05 Lun: 00
  Vendor: COMPAQ Model: NS ROUTER E1200  Rev: 568c
  Type: Unknown                         ANSI SCSI revision: 04

Host: scsi3 Channel: 00 Id: 03 Lun: 00
  Vendor: HP    Model: HSV210          Rev: 6100
  Type: Unknown                         ANSI SCSI revision: 05
Host: scsi3 Channel: 00 Id: 03 Lun: 01
  Vendor: HP    Model: HSV210          Rev: 6100
  Type: Direct-Access                   ANSI SCSI revision: 05
。。。。。。（同上）
Host: scsi3 Channel: 00 Id: 04 Lun: 00
  Vendor: HP    Model: ESL9000 Series Rev: 3.60
  Type: Medium Changer                ANSI SCSI revision: 02
Host: scsi3 Channel: 00 Id: 04 Lun: 01
  Vendor: COMPAQ Model: NS ROUTER E1200  Rev: 568c
  Type: Unknown                         ANSI SCSI revision: 04
Host: scsi3 Channel: 00 Id: 05 Lun: 00
  Vendor: COMPAQ Model: NS ROUTER E1200  Rev: 568c
  Type: Unknown                         ANSI SCSI revision: 04
從tsm下的/drivers/bin/auto_config配置只能認到機械手，請問dx如何才能認到帶機�。渴遣皇球�(qū)動沒有裝好？

啟動tsm報錯：
Cannot open /etc/hba.conf
ANR1792W HBAAPI vendor library failed to load or is missing.
ANR8963E Unable to find path to match the serial number defined for drive DRIVE08 in library ESL9322 .
ANR8439I SCSI library ESL9322 is ready for operations.

作者: 芙蓉王 時間: 2007-08-28 21:57
# /sbin/lsmod
Module                Size  Used by Not tainted
sg                   37228 0
st                   31364 0  (unused)
parport_pc          18852 1  (autoclean)
lp                   9124 0  (autoclean)
parport             38816 1  (autoclean) [parport_pc lp]
autofs4             16952 0  (autoclean) (unused)
audit                90552 3
e1000                76956 0  (unused)
tg3                   65832 1
microcode             6848 0  (autoclean)
lpfcdfc             151528 0  (unused)
loop                12696 0  (autoclean)
lvm-mod             65056 6
keybdev                2976 0  (unused)
mousedev             5624 1
hid                   22276 0  (unused)
input                6144 0  [keybdev mousedev hid]
ehci-hcd             20776 0  (unused)
usb-uhci             26956 0  (unused)
usbcore             81056 1  [hid ehci-hcd usb-uhci]
ext3                89960  17
jbd                   55060  17  [ext3]
lpfc                242704  13  [lpfcdfc]
cciss                45092 8
mptscsih             42224 0
mptbase             42784 3  [mptscsih]
diskdumplib          3776 0  [mptscsih mptbase]
sd_mod                13712  26
scsi_mod             114344 5  [sg st lpfc cciss mptscsih sd_mod]

還是沒輒？

作者: wnzl 時間: 2007-08-29 11:12
帶機的驅動裝了嗎？

作者: 芙蓉王 時間: 2007-08-29 14:31
裝了，hp的ltt的驅動

作者: 芙蓉王 時間: 2007-08-29 14:33
直接編輯lb.conf和mt.conf，然后使用tsmscsi的驅動可以么？

作者: 20060906 時間: 2008-01-07 17:30
解決了嗎，怎么解決的最后？

作者: donggua0713 時間: 2008-02-24 09:52
碰到同樣的問題，順利解決，不過是普通的磁帶機，參考一下：
centos 4.4,tsm for linux 5.3.2,HP dat 40磁帶機，癥狀和樓主一樣，看書，發現，裝過tsmscsi驅動包以后，在/opt/tivoli/tsm/device/bin目錄下，有個autoconf文件，可以自動配置磁帶機的，比如我沒運行這個文件以前，定義path時，device用的是/dev/st0，報和樓住一樣的錯誤，百思不得其解，后來看書發現有這么個東西，運行后，device用的是/dev/tsmscsi/mt0，就OK了。

歡迎光臨 Chinaunix (http://www.72891.cn/)