-t=*) transformarg=`echo $1 | sed 's/-t=//'`
shift
continue;;
-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
shift
continue;;
*) if [ x"$src" = x ]
then
src=$1
else
# this colon is to work around a 386BSD /bin/sh bug
:
dst=$1
fi
shift
continue;;
esac
done
if [ x"$src" = x ]
then
echo "install: no input file specified"
exit 1
else
true
fi
if [ x"$dir_arg" != x ]; then
dst=$src
src=""
if [ -d $dst ]; then
instcmd=:
else
instcmd=mkdir
fi
else
# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
if [ -f $src -o -d $src ]
then
true
else
echo "install: $src does not exist"
exit 1
fi
if [ x"$dst" = x ]
then
echo "install: no destination specified"
exit 1
else
true
fi
# If destination is a directory, append the input filename; if your system
# does not like double slashes in filenames, you may need to add some logic
if [ -d $dst ]
then
dst="$dst"/`basename $src`
else
true
fi
fi
## this sed command emulates the dirname command
dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
# Make sure that the destination directory exists.
# this part is taken from Noah Friedman's mkinstalldirs script
# Skip lots of stat calls in the usual case.
if [ ! -d "$dstdir" ]; then
defaultIFS='
'
IFS="${IFS-${defaultIFS}}"
oIFS="${IFS}"
# Some sh's can't handle IFS=/ for some reason.
IFS='%'
set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
IFS="${oIFS}"
pathcomp=''
while [ $# -ne 0 ] ; do
pathcomp="${pathcomp}${1}"
shift
if [ ! -d "${pathcomp}" ] ;
then
$mkdirprog "${pathcomp}"
else
true
fi
pathcomp="${pathcomp}/"
done
fi
if [ x"$dir_arg" != x ]
then
$doit $instcmd $dst &&
if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
else
# If we're going to rename the final executable, determine the name now.
if [ x"$transformarg" = x ]
then
dstfile=`basename $dst`
else
dstfile=`basename $dst $transformbasename |
sed $transformarg`$transformbasename
fi
# don't allow the sed command to completely eliminate the filename
if [ x"$dstfile" = x ]
then
dstfile=`basename $dst`
else
true
fi
# Make a temp file name in the proper directory.
dsttmp=$dstdir/#inst.$$#
# Move or copy the file name to the temp name
$doit $instcmd $src $dsttmp &&
trap "rm -f ${dsttmp}" 0 &&
# and set any options; do chmod last to preserve setuid bits
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $instcmd $src $dsttmp" command.
if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
exit 0
到此install.sh文件結束了。
下面的是Makefile文件:
# Generated automatically from Makefile.in by configure.
# NOTE: If you have no `make' program at all to process this makefile, run
# `build.sh' instead.
#
# Copyright (C) 1988, 1989, 1991, 1992, 1993, 1994 Free Software Foundation, Inc.
# This file is part of GNU Make.
#
# GNU Make is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# GNU Make is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GNU Make; see the file COPYING. If not, write to
# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
#
# Makefile for GNU Make
#
# Ultrix 2.2 make doesn't expand the value of VPATH.
# This must repeat the value, because configure will remove `VPATH = .'.
srcdir = .
CC = gcc
CFLAGS = -g
LDFLAGS = -g
# How to invoke ranlib. This is only used by the `glob' subdirectory.
RANLIB = ranlib
# Define these for your system as follows:
# -DNO_ARCHIVES To disable `ar' archive support.
# -DNO_FLOAT To avoid using floating-point numbers.
# -DENUM_BITFIELDS If the compiler isn't GCC but groks enum foo:2.
# Some compilers apparently accept this
# without complaint but produce losing code,
# so beware.
# NeXT 1.0a uses an old version of GCC, which required -D__inline=inline.
# See also `config.h'.
defines = -DHAVE_CONFIG_H -DLIBDIR=\"$(libdir)\" -DINCLUDEDIR=\"$(includedir)\"
# Which flavor of remote job execution support to use.
# The code is found in `remote-$(REMOTE).c'.
REMOTE = stub
# If you are using the GNU C library, or have the GNU getopt functions in
# your C library, you can comment these out.
GETOPT = getopt.o getopt1.o
GETOPT_SRC = $(srcdir)/getopt.c $(srcdir)/getopt1.c $(srcdir)/getopt.h
# If you are using the GNU C library, or have the GNU glob functions in
# your C library, you can comment this out. GNU make uses special hooks
# into the glob functions to be more efficient (by using make's directory
# cache for globbing), so you must use the GNU functions even if your
# system's C library has the 1003.2 glob functions already. Also, the glob
# functions in the AIX and HPUX C libraries are said to be buggy.
GLOB = glob/libglob.a
# If your system doesn't have alloca, or the one provided is bad, define this.
ALLOCA =
ALLOCA_SRC = $(srcdir)/alloca.c
# If your system needs extra libraries loaded in, define them here.
# System V probably need -lPW for alloca. HP-UX 7.0's alloca in
# libPW.a is broken on HP9000s300 and HP9000s400 machines. Use
# alloca.c instead on those machines.
LOADLIBES = -lkvm
# Any extra object files your system needs.
extras =
# Common prefix for machine-independent installed files.
prefix = /usr/local
# Common prefix for machine-dependent installed files.
exec_prefix = $(prefix)
# Directory to install `make' in.
bindir = $(exec_prefix)/bin
# Directory to find libraries in for `-lXXX'.
libdir = $(exec_prefix)/lib
# Directory to search by default for included makefiles.
includedir = $(prefix)/include
# Directory to install the Info files in.
infodir = $(prefix)/info
# Directory to install the man page in.
mandir = $(prefix)/man/man$(manext)
# Number to put on the man page filename.
manext = 1
# Prefix to put on installed `make' binary file name.
binprefix =
# Prefix to put on installed `make' man page file name.
manprefix = $(binprefix)
# Whether or not make needs to be installed setgid.
# The value should be either `true' or `false'.
# On many systems, the getloadavg function (used to implement the `-l'
# switch) will not work unless make is installed setgid kmem.
install_setgid = false
# Install make setgid to this group so it can read /dev/kmem.
group =
# Program to install `make'.
INSTALL_PROGRAM = ${INSTALL}
# Program to install the man page.
INSTALL_DATA = ${INSTALL} -m 644
# Generic install program.
INSTALL = ./install.sh -c
# Program to format Texinfo source into Info files.
MAKEINFO = makeinfo
# Program to format Texinfo source into DVI files.
TEXI2DVI = texi2dvi
# Programs to make tags files.
ETAGS = etags -tw
CTAGS = ctags -tw
all: make
check: # No tests.
info: make.info
dvi: make.dvi
# Some makes apparently use .PHONY as the default goal is it is before `all'.
.PHONY: all check info dvi
$(bindir)/$(binprefix)make: make
$(INSTALL_PROGRAM) make $@.new
@if $(install_setgid); then \
if chgrp $(group) $@.new && chmod g+s $@.new; then \
echo "chgrp $(group) $@.new && chmod g+s $@.new"; \
else \
echo "$@ needs to be owned by group $(group) and setgid;"; \
echo "otherwise the \`-l' option will probably not work."; \
echo "You may need special priveleges to install $@."; \
fi; \
else true; fi
# Some systems can't deal with renaming onto a running binary.
-rm -f $@.old
-mv $@ $@.old
mv $@.new $@
$(infodir)/make.info: make.info
if [ -r ./make.info ]; then dir=.; else dir=$(srcdir); fi; \
for file in $${dir}/make.info*; do \
name="`basename $$file`"; \
$(INSTALL_DATA) $$file \
`echo $@ | sed "s,make.info\$$,$$name,"`; \
done
# Run install-info only if it exists.
# Use `if' instead of just prepending `-' to the
# line so we notice real errors from install-info.
# We use `$(SHELL) -c' because some shells do not
# fail gracefully when there is an unknown command.
if $(SHELL) -c 'install-info --version' >/dev/null 2>&1; then \
install-info --infodir=$(infodir) $$dir/make.info; \
else true; fi
loadavg: loadavg.c config.h
$(CC) $(defines) -DTEST -I. -I$(srcdir) $(CFLAGS) $(LDFLAGS) \
loadavg.c $(LOADLIBES) -o $@
# We copy getloadavg.c into a different file rather than compiling it
# directly because some compilers clobber getloadavg.o in the process.
loadavg.c: getloadavg.c
ln $(srcdir)/getloadavg.c loadavg.c || \
cp $(srcdir)/getloadavg.c loadavg.c
check-loadavg: loadavg
@echo The system uptime program believes the load average to be:
-uptime
@echo The GNU load average checking code believes:
./loadavg
check: check-loadavg
# These rules cause too much trouble.
#configure: configure.in
# autoconf $(ACFLAGS)
#config.h.in: configure.in
# autoheader $(ACFLAGS)
# This tells versions [3.59,3.63) of GNU make not to export all variables.
.NOEXPORT:
# The automatically generated dependencies below may omit config.h
# because it is included with ``#include <config.h>'' rather than
# ``#include "config.h"''. So we add the explicit dependency to make sure.
$(objs): config.h
# Automatically generated dependencies will be put at the end of the file.