亚洲av成人无遮挡网站在线观看,少妇性bbb搡bbb爽爽爽,亚洲av日韩精品久久久久久,兔费看少妇性l交大片免费,无码少妇一区二区三区

Chinaunix

標題: Solaris 3.0 cluster 安裝疑問？ [打印本頁]

作者: liuzhensh 時間: 2006-06-09 17:10
標題: Solaris 3.0 cluster 安裝疑問？
原Solaris cluster 3.0 ,A,B雙機，運行正常。后A機崩潰，重裝操作系統，但在安裝VERITAS 軟件時發現，B機的VERITAS 為3.5,但手上只有VERITAS 4.0的軟件，那么在雙機中是否要求該VERITAS 軟件一定一至呢？現在是否還有其它的辦法，最簡單的恢復雙機呢，謝謝！現在思路安裝還不是很清楚，希望各位大蝦多多指點，謝謝！\n\n[ 本帖最后由 liuzhensh 于 2006-6-9 17:11 編輯 ]

作者: vahmoiz 時間: 2006-06-12 10:47
你不用veritas不行��？\r\n如果一定要用，建議一致，當然也可以試一下它的兼容性，嘿嘿

作者: stewen 時間: 2006-06-13 13:34
VM 3.5到處都是，下載一個就可以了。\r\n如果你有vm4.0 for hp11i　或者h(yuǎn)pux 11.23 os 的軟件，那么我可以提供vm3.5 for sun 的軟件給你，并幫你解決遇到的所有問題。

作者: fireware 時間: 2006-06-13 14:51
是必須一致的,必須安裝.

作者: liuzhensh 時間: 2006-06-13 15:14
stewen ，我可以從哪里下載3.5的版本呢？\r\n手上有vm2.2 for HP，hp os有11i\r\n今天找到了veritas volume manger 3.5的軟件刻錄盤，不過還需要試試能不能用， sun 的cluster第一次搞，\r\n這昨天碰到的問題是新安裝的系統找不到另一臺機器的路徑如下：\r\nroot@fep2 # scdidadm -L \r\n1 fep1:/dev/rdsk/c0t0d0 /dev/did/rdsk/d1 \r\n2 fep1:/dev/rdsk/c1t0d0 /dev/did/rdsk/d2 \r\n3 fep1:/dev/rdsk/c1t1d0 /dev/did/rdsk/d3 \r\n4 fep1:/dev/rdsk/c1t2d0 /dev/did/rdsk/d4 \r\n5 fep1:/dev/rdsk/c1t3d0 /dev/did/rdsk/d5 \r\n6 fep1:/dev/rdsk/c0t0d1 /dev/did/rdsk/d6 \r\n7 fep1:/dev/rdsk/c0t0d2 /dev/did/rdsk/d7 \r\n8 fep1:/dev/rdsk/c2t0d0 /dev/did/rdsk/d8 \r\n8 fep2:/dev/rdsk/c2t0d0 /dev/did/rdsk/d8 \r\n9 fep1:/dev/rdsk/c2t1d0 /dev/did/rdsk/d9 \r\n9 fep2:/dev/rdsk/c2t1d0 /dev/did/rdsk/d9 \r\n10 fep1:/dev/rdsk/c3t0d0 /dev/did/rdsk/d10 \r\n10 fep2:/dev/rdsk/c3t0d0 /dev/did/rdsk/d10 \r\n11 fep1:/dev/rdsk/c3t1d0 /dev/did/rdsk/d11 \r\n11 fep2:/dev/rdsk/c3t1d0 /dev/did/rdsk/d11 \r\n12 fep2:/dev/rdsk/c0t0d0 /dev/did/rdsk/d12 \r\n13 fep2:/dev/rdsk/c1t0d0 /dev/did/rdsk/d13 \r\n14 fep2:/dev/rdsk/c1t1d0 /dev/did/rdsk/d14 \r\n15 fep2:/dev/rdsk/c1t2d0 /dev/did/rdsk/d15 \r\n16 fep2:/dev/rdsk/c1t3d0 /dev/did/rdsk/d16 \r\n17 fep2:/dev/rdsk/c0t0d1 /dev/did/rdsk/d17 \r\n18 fep2:/dev/rdsk/c0t0d2 /dev/did/rdsk/d18 \r\n\r\nfep1# scdidadm -L\r\n1 fep1:/dev/rdsk/c0t0d0 /dev/did/rdsk/d1 \r\n2 fep1:/dev/rdsk/c0t1d0 /dev/did/rdsk/d2 \r\n3 fep1:/dev/rdsk/c1t0d0 /dev/did/rdsk/d3 \r\n4 fep1:/dev/rdsk/c1t1d0 /dev/did/rdsk/d4 \r\n5 fep1:/dev/rdsk/c2t0d0 /dev/did/rdsk/d5 \r\n6 fep1:/dev/rdsk/c3t0d0 /dev/did/rdsk/d6 \r\n7 fep1:/dev/rdsk/c3t1d0 /dev/did/rdsk/d7 \r\n8 fep1:/dev/rdsk/c3t2d0 /dev/did/rdsk/d8 \r\n9 fep1:/dev/rdsk/c3t3d0 /dev/did/rdsk/d9 \r\n10 fep1:/dev/rdsk/c2t0d1 /dev/did/rdsk/d10 \r\n11 fep1:/dev/rdsk/c2t0d2 /dev/did/rdsk/d11\r\n\r\n搞了很久不知道是啥子原因，能幫我嗎？

作者: nimysun 時間: 2006-06-13 16:36
還是找專業一點的人安裝，比較麻煩！

作者: stewen 時間: 2006-06-13 16:43
先檢查兩臺主機的/global文件系統.\r\n執行df -k和mount -a, 把錯誤信息發給我\r\n你有遠程連接環境嗎, 我連上去, 幫你解決算了!

作者: liuzhensh 時間: 2006-06-13 17:54
root@fep1 # df -k\r\nFilesystem kbytes used avail capacity Mounted on\r\n/dev/dsk/c0t0d0s0 52667679 2579895 49561108 5% /\r\n/proc 0 0 0 0% /proc\r\nfd 0 0 0 0% /dev/fd\r\nmnttab 0 0 0 0% /etc/mnttab\r\nswap 39720872 136 39720736 1% /var/run\r\nswap 39721856 1120 39720736 1% /tmp\r\n/dev/did/dsk/d1s7 526175 3661 469897 1% /global/.devices/node@1\r\n/vol/dev/dsk/c2t0d2/suncluster_3_0_u3\r\n 67232 67232 0 100% /cdrom/suncluster_3_0_u3\r\nroot@fep1 # mount -a\r\nmount: /tmp already mounted\r\n\r\nroot@fep2 # df -k\r\nFilesystem kbytes used avail capacity Mounted on\r\n/dev/vx/dsk/rootvol 52667679 3084011 49056992 6% /\r\n/proc 0 0 0 0% /proc\r\nfd 0 0 0 0% /dev/fd\r\nmnttab 0 0 0 0% /etc/mnttab\r\nswap 23303800 144 23303656 1% /var/run\r\nswap 23304664 1008 23303656 1% /tmp\r\n/dev/vx/dsk/rootdisk_26vol\r\n 498039 3651 444585 1% /global/.devices/node@2\r\nroot@fep2 # mount -a\r\nmount: /tmp already mounted\r\n\r\n執行后哪里有報錯哦，沒見著呀？\r\n\r\n現場沒得撥號環境，謝謝！

作者: liuzhensh 時間: 2006-06-13 17:59
今天同事建議我，兩臺機器都重新安裝。\r\n我現在是想將fep1安裝好軟件后重新加入fep2的cluster，不知道哪種方法更容易些？\r\n\r\n\r\nstewen郵箱發一下，這樣更好聯系啦，呵呵

作者: stewen 時間: 2006-06-13 19:11
請分別在兩個主機上執行more /etc/vfstab

作者: stewen 時間: 2006-06-13 19:12
兩臺機器都重新安裝的方法也可以考慮一下.

作者: liuzhensh 時間: 2006-06-13 19:48
root@fep1 # more vfstab\r\n#device device mount FS fsck mount mount\r\n#to mount to fsck point type pass at boot options\r\n# \r\n#/dev/dsk/c1d0s2 /dev/rdsk/c1d0s2 /usr ufs 1 yes -\r\nfd - /dev/fd fd - no -\r\n/proc - /proc proc - no -\r\n/dev/dsk/c0t0d0s1 - - swap - no -\r\n/dev/dsk/c3t0d0s1 - - swap - no -\r\n/dev/dsk/c0t0d0s0 /dev/rdsk/c0t0d0s0 / ufs 1 no -\r\n#/dev/dsk/c0t0d0s7 /dev/rdsk/c0t0d0s7 /globaldevices ufs 2 yes -\r\nswap - /tmp tmpfs - yes -\r\n#/dev/did/dsk/d1s7 /dev/did/rdsk/d1s7 /global/.devices/node@1 ufs 2 no global\r\n#/dev/dsk/c0t0d0s7 /dev/rdsk/c0t0d0s7 /globaldevices ufs 2 yes -\r\n/dev/did/dsk/d1s7 /dev/did/rdsk/d1s7 /global/.devices/node@1 ufs 2 no global\r\n\r\nroot@fep2 # more vfstab\r\n#device device mount FS fsck mount mount\r\n#to mount to fsck point type pass at boot options\r\n# \r\n#/dev/dsk/c1d0s2 /dev/rdsk/c1d0s2 /usr ufs 1 yes -\r\nfd - /dev/fd fd - no -\r\n/proc - /proc proc - no -\r\n/dev/vx/dsk/swapvol - - swap - no -\r\n/dev/vx/dsk/rootvol /dev/vx/rdsk/rootvol / ufs 1 no logging\r\n#/dev/dsk/c1t0d0s6 /dev/rdsk/c1t0d0s6 /globaldevices ufs 2 yes -\r\nswap - /tmp tmpfs - yes -\r\n#/dev/did/dsk/d13s6 /dev/did/rdsk/d13s6 /global/.devices/node@2 ufs 2 no global\r\n/dev/vx/dsk/rootdisk_26vol /dev/vx/rdsk/rootdisk_26vol /global/.devices/node@2 ufs 2 no global\r\n#NOTE: volume rootvol (/) encapsulated partition c1t0d0s0\r\n#NOTE: volume swapvol (swap) encapsulated partition c1t0d0s1\r\n#NOTE: volume rootdisk_26vol (/global/.devices/node@2) encapsulated partition c1t0d0s6

作者: stewen 時間: 2006-06-14 00:47
請?jiān)趦膳_(tái)主機上運行scstat -p，然后把結果貼出來。

作者: xuefm 時間: 2006-06-14 13:12

原帖由 liuzhensh 于 2006-6-13 17:59 發表\r\n今天同事建議我，兩臺機器都重新安裝。\r\n我現在是想將fep1安裝好軟件后重新加入fep2的cluster，不知道哪種方法更容易些？\r\n\r\n\r\nstewen郵箱發一下，這樣更好聯系啦，呵呵

\r\n\r\n別再折騰了，兩臺都重新安裝把。

作者: stewen 時間: 2006-06-14 15:39

原帖由 xuefm 于 2006-6-14 13:12 發表\r\n\r\n\r\n別再折騰了，兩臺都重新安裝把。

\r\n\r\n\r\n\r\n人家還不急呢，你急啥！

作者: liuzhensh 時間: 2006-06-14 16:28
誰說偶不急了，感覺再搞下去是也不會有什么結果，只是現在好的那臺在測試別的不能停，周末把兩臺都搞掉重來啦\r\n感謝stewen的幫助，謝謝

作者: liuzhensh 時間: 2006-06-14 17:29
Select a Locale\r\n\r\n 38. Romania (ISO8859-2)\r\n 39. Russia (ANSI 1251)\r\n 40. Russia (ISO8859-5)\r\n 41. Russia (KOI8-R)\r\n 42. Russia (UTF-

\r\n 43. Serbia (ISO8859-5)\r\n 44. Slovakia (ISO8859-2)\r\n 45. Slovenia (ISO8859-2)\r\n 46. Thai\r\n 47. Turkey (ISO8859-9)\r\n 48. Turkey (UTF-

\r\n 49. U.S.A. (en_US.ISO8859-1)\r\n 50. U.S.A. (en_US.ISO8859-15)\r\n 51. Go Back to Previous Screen\r\n\r\nPress Return to show more choices.\r\nPlease make a choice (0 - 51), or press h or ? for help: 0\r\nBroken Pipe\r\nsed: syntax error at line 2: `newline or ;\' unexpected\r\nsed: syntax error at line 2: `newline or ;\' unexpected\r\nsed: syntax error at line 2: `newline or ;\' unexpected\r\nnawk: syntax error at line 2: `newline or ;\' unexpected\r\nrm: syntax error at line 2: `newline or ;\' unexpected\r\nrm: syntax error at line 2: `newline or ;\' unexpected\r\nrm: syntax error at line 2: `newline or ;\' unexpected\r\nrm: syntax error at line 2: `newline or ;\' unexpected\r\nrm: syntax error at line 2: `newline or ;\' unexpected\r\nstartinstall: syntax error at line 2: `newline or ;\' unexpected\r\n\r\n那位大蝦可以告訴我，安裝系統的第二步就報錯了，使啥子原因呀，怎樣規避，謝謝！

作者: stewen 時間: 2006-06-14 18:57
暈！\r\n\r\n你現在遇到的問題，可能是光驅或者光盤讀盤的問題，可以重新啟動再試幾次。\r\n如果還是不行，可以換一下新版的ＯＳ盤。

歡迎光臨 Chinaunix (http://www.72891.cn/)