亚洲av成人无遮挡网站在线观看,少妇性bbb搡bbb爽爽爽,亚洲av日韩精品久久久久久,兔费看少妇性l交大片免费,无码少妇一区二区三区

Chinaunix

標題: 設置網卡MTU值大于1500引起系統無法進入 [打印本頁]

作者: -scofield- 時間: 2012-08-17 17:51
標題: 設置網卡MTU值大于1500引起系統無法進入
以下是基本信息：
操作系統：
[root@node1 ~]# cat /etc/redhat-release
CentOS release 5.8 (Final)

內核：2.6.18-308.11.1.el5 #1 SMP Tue Jul 10 08:48:43 EDT 2012 x86_64 x86_64 x86_64 GNU/Linux

網卡：
[root@node1 ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth4
# Broadcom Corporation NetXtreme II BCM57711 10-Gigabit PCIe

網卡驅動信息：
[root@node1 ~]# modinfo bnx2
filename:    /lib/modules/2.6.18-308.11.1.el5/updates/bnx2.ko
version:       2.2.1j
license:       GPL
description: Broadcom NetXtreme II BCM5706/5708/5709/5716 Driver
author:       Michael Chan <mchan@broadcom.com>
srcversion:    92BB1824D1695C4AE860E5F
alias:       pci:v000014E4d0000163Csv*sd*bc*sc*i*
alias:       pci:v000014E4d0000163Bsv*sd*bc*sc*i*
alias:       pci:v000014E4d0000163Asv*sd*bc*sc*i*
alias:       pci:v000014E4d00001639sv*sd*bc*sc*i*
alias:       pci:v000014E4d000016ACsv*sd*bc*sc*i*
alias:       pci:v000014E4d000016AAsv*sd*bc*sc*i*
alias:       pci:v000014E4d000016AAsv0000103Csd00003102bc*sc*i*
alias:       pci:v000014E4d0000164Csv*sd*bc*sc*i*
alias:       pci:v000014E4d0000164Asv*sd*bc*sc*i*
alias:       pci:v000014E4d0000164Asv0000103Csd00003106bc*sc*i*
alias:       pci:v000014E4d0000164Asv0000103Csd00003101bc*sc*i*
depends:
vermagic:    2.6.18-308.11.1.el5 SMP mod_unload gcc-4.1
parm:          disable_msi

isable Message Signaled Interrupt (MSI) (int)
parm:          stop_on_tx_timeout:For debugging purposes, prevent a chip  reset when a tx timeout occurs (int)

[root@node1 ~]# modinfo bnx2x
filename:    /lib/modules/2.6.18-308.11.1.el5/updates/bnx2x.ko
version:       1.72.18
license:       GPL
description: Broadcom NetXtreme II BCM57710/57711/57711E/57712/57712_MF/57800/57800_MF/57810/57810_MF/57840/57840_MF Driver
author:       Eliezer Tamir
srcversion:    F84292F58B1A38007566C38
alias:       pci:v000014E4d000016ABsv*sd*bc*sc*i*
alias:       pci:v000014E4d0000168Dsv*sd*bc*sc*i*
alias:       pci:v000014E4d000016AEsv*sd*bc*sc*i*
alias:       pci:v000014E4d0000168Esv*sd*bc*sc*i*
alias:       pci:v000014E4d000016A5sv*sd*bc*sc*i*
alias:       pci:v000014E4d0000168Asv*sd*bc*sc*i*
alias:       pci:v000014E4d00001663sv*sd*bc*sc*i*
alias:       pci:v000014E4d00001662sv*sd*bc*sc*i*
alias:       pci:v000014E4d00001650sv*sd*bc*sc*i*
alias:       pci:v000014E4d0000164Fsv*sd*bc*sc*i*
alias:       pci:v000014E4d0000164Esv*sd*bc*sc*i*
depends:       8021q
vermagic:    2.6.18-308.11.1.el5 SMP mod_unload gcc-4.1
parm:          pri_map: Priority to HW queue mapping (uint)
parm:          num_queues: Set number of queues (default is as a number of CPUs) (uint)
parm:          disable_iscsi_ooo: Disable iSCSI OOO support (uint)
parm:          disable_tpa: Disable the TPA (LRO) feature (uint)
parm:          int_mode: Force interrupt mode other than MSI-X (1 INT#x; 2 MSI) (uint)
parm:          dropless_fc: Pause on exhausted host ring (uint)
parm:          poll: Use polling (for debug) (uint)
parm:          mrrs: Force Max Read Req Size (0..3) (for debug) (uint)
parm:          debug: Default debug msglevel (uint)
parm:          autogreeen: Set autoGrEEEn (0:HW default; 1:force on; 2:force off) (uint)
parm:          tx_switching: Enable tx-switching (uint)

該網卡所使用的驅動：
[root@node1 ~]# ethtool -i eth4
driver: bnx2x
version: 1.72.18
firmware-version: 5.0.12 bc 5.0.13 phy aa0.406
bus-info: 0000:06:00.0

系統啟動提示信息：（摘出關于該網卡連接iscsi的部分）
Aug 17 05:02:48 node1 kernel: iscsi: registered transport (cxgb3i)
Aug 17 05:02:48 node1 kernel: cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.9d (Mar 07, 2012)
Aug 17 05:02:48 node1 kernel: bnx2x 0000:06:00.0: eth4: Added CNIC device
Aug 17 05:02:48 node1 kernel: bnx2x 0000:06:00.1: eth5: Added CNIC device
Aug 17 05:02:48 node1 kernel: Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.2.1k (Mar 06, 2012)
Aug 17 05:02:48 node1 kernel: iscsi: registered transport (bnx2i)
Aug 17 05:02:48 node1 kernel: scsi6 : Broadcom Offload iSCSI Initiator
Aug 17 05:02:48 node1 kernel: scsi7 : Broadcom Offload iSCSI Initiator
Aug 17 05:02:48 node1 kernel: iscsi: registered transport (tcp)
Aug 17 05:02:48 node1 kernel: iscsi: registered transport (iser)
Aug 17 05:02:48 node1 kernel: iscsi: registered transport (be2iscsi)
Aug 17 05:02:48 node1 kernel: NET: Registered protocol family 10
Aug 17 05:02:48 node1 kernel: lo: Disabled Privacy Extensions
Aug 17 05:02:48 node1 kernel: IPv6 over IPv4 tunneling driver
Aug 17 05:02:48 node1 kernel: sit0: Disabled Privacy Extensions
Aug 17 05:02:48 node1 kernel: 8021q: adding VLAN 0 to HW filter on device eth0
Aug 17 05:02:48 node1 kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Aug 17 05:02:48 node1 kernel: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
Aug 17 05:02:48 node1 kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Aug 17 05:02:48 node1 kernel: bnx2x 0000:06:00.0: eth4: using MSI-X  IRQs: sp 123  fp[0] 139 ... fp[14] 60
Aug 17 05:02:48 node1 kernel: bnx2i [06:00.00]: ISCSI_INIT passed
Aug 17 05:02:48 node1 kernel: ADDRCONF(NETDEV_UP): eth4: link is not ready
Aug 17 05:02:48 node1 kernel: bnx2x 0000:06:00.0: eth4: NIC Link is Up, 10000 Mbps full duplex, Flow control: none
Aug 17 05:02:48 node1 kernel: ADDRCONF(NETDEV_CHANGE): eth4: link becomes ready
Aug 17 05:02:51 node1 iscsid: connect to 192.168.3.253:3260 failed (No route to host)
Aug 17 05:03:04 node1 kernel: scsi8 : iSCSI Initiator over TCP/IP
Aug 17 05:03:04 node1 kernel: Vendor: SCST_BIO  Model: 9RontQmniY7bZy4d  Rev:  210
Aug 17 05:03:04 node1 kernel: Type: Direct-Access                   ANSI SCSI revision: 05
Aug 17 05:03:04 node1 kernel: sdb : very big device. try to use READ CAPACITY(16).
Aug 17 05:03:04 node1 kernel: SCSI device sdb: 14035845120 512-byte hdwr sectors (7186353 MB)
Aug 17 05:03:04 node1 kernel: sdb: Write Protect is off
Aug 17 05:03:04 node1 kernel: SCSI device sdb: drive cache: write back
Aug 17 05:03:04 node1 kernel: sdb : very big device. try to use READ CAPACITY(16).
Aug 17 05:03:04 node1 kernel: SCSI device sdb: 14035845120 512-byte hdwr sectors (7186353 MB)
Aug 17 05:03:04 node1 kernel: sdb: Write Protect is off
Aug 17 05:03:04 node1 kernel: SCSI device sdb: drive cache: write back
Aug 17 05:03:04 node1 iscsid: Connection1:0 to [target: iqn.2012-09:dss.target0, portal: 192.168.3.253,3260] through [iface:
default] is operational now
Aug 17 05:03:07 node1 udevd-event[5208]: wait_for_sysfs: waiting for '/sys/devices/platform/host8/session1/target8:0:0/8:0:0:
0/ioerr_cnt' failed
Aug 17 05:03:14 node1 kernel:  sdb:<3> connection1:0: ping timeout of 5 secs expired, recv timeout 5, last rx 4294739679, las
t ping 4294744679, now 4294749679
Aug 17 05:03:14 node1 kernel:  connection1:0: detected conn error (1011)
Aug 17 05:03:15 node1 iscsid: Kernel reported iSCSI connection 1:0 error (1011) state (3)
Aug 17 05:03:15 node1 iscsid: Could not online LUN 0 err 2.
Aug 17 05:03:15 node1 iscsid: connection1:0 is operational after recovery (1 attempts)
Aug 17 05:03:25 node1 kernel:  connection1:0: ping timeout of 5 secs expired, recv timeout 5, last rx 4294750501, last ping 4
294755501, now 4294760501
Aug 17 05:03:25 node1 kernel:  connection1:0: detected conn error (1011)
Aug 17 05:03:25 node1 iscsid: Kernel reported iSCSI connection 1:0 error (1011) state (3)
Aug 17 05:03:26 node1 iscsid: Could not online LUN 0 err 2.
Aug 17 05:03:26 node1 iscsid: connection1:0 is operational after recovery (1 attempts)
Aug 17 05:03:36 node1 kernel:  connection1:0: ping timeout of 5 secs expired, recv timeout 5, last rx 4294761316, last ping 4
294766316, now 4294771316

Aug 17 05:03:36 node1 kernel:  connection1:0: detected conn error (1011)
Aug 17 05:03:36 node1 iscsid: Kernel reported iSCSI connection 1:0 error (1011) state (3)
Aug 17 05:03:37 node1 iscsid: Could not online LUN 0 err 2.
Aug 17 05:03:37 node1 iscsid: connection1:0 is operational after recovery (1 attempts)
Aug 17 05:03:46 node1 kernel:  connection1:0: ping timeout of 5 secs expired, recv timeout 5, last rx 4294772137, last ping 4
294777137, now 4294782137
這部分信息將無限重復，無法進入系統。

交換機環境：萬兆博通的，開啟巨型幀，存儲也開啟，并同時設置為mtu=9216，暢通。

部署需要：兩臺服務器需要開啟巨型幀，默認1500完全OK，但是為了性能考慮設置9000.9216后無法進入系統，但是存儲服務器使用的open-e設置值為9216完全OK，交換機也是9216.在Windows下測試沒有問題，以上所安裝的驅動已經是更新后的官方最新版本。特此尋找有經驗的兄弟幫忙看看是什么問題導致的。

個人想到以下問題：內核原因，iscsi服務，或者使用的協議不對。具體還要看各位大神有什么好的辦法沒有。小弟在此謝過。

作者: -scofield- 時間: 2012-08-17 20:07
這么多人看就是沒有人回，焦急的等待

作者: 沉寂 時間: 2012-08-19 10:30
這個估計是大家都不是很熟悉，所以沒人回答，當然現在網絡版也確實不是很興旺。

作者: r2007 時間: 2012-08-19 12:47

-scofield- 發表于 2012-08-17 17:51
但是為了性能考慮設置9000.9216后無法進入系統，

這句話沒整明白

作者: -scofield- 時間: 2012-08-20 17:08
回復 4# r2007

就是設置該網卡的MTU=9000或者=9216

作者: tomer 時間: 2013-02-01 17:40
擼主是通過iscsi存儲的嗎