亚洲av成人无遮挡网站在线观看,少妇性bbb搡bbb爽爽爽,亚洲av日韩精品久久久久久,兔费看少妇性l交大片免费,无码少妇一区二区三区

Chinaunix

標題: 根據linux Oops定位錯誤代碼行 [打印本頁]

作者: zhuqing_739 時間: 2012-05-16 15:17
標題: 根據linux Oops定位錯誤代碼行
本帖最后由 zhuqing_739 于 2012-05-16 15:18 編輯

這幾天一直在調試atmel at91sam9x25的串口，用著用著總會導致Oops，Oops內容如下：
[ 1023.510000] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[ 1023.520000] pgd = c0004000
[ 1023.520000] [00000000] *pgd=00000000
[ 1023.520000] Internal error: Oops: 17 [#1]
[ 1023.520000] last sysfs file: /sys/devices/virtual/misc/at91flash/dev
[ 1023.520000] Modules linked in: at91flash at91gpio at91mc323 ds18b20 at91adc
[ 1023.520000] CPU: 0 Tainted: G W (2.6.39 #35)
[ 1023.520000] PC is at atmel_tasklet_func+0x104/0x690
[ 1023.520000] LR is at atmel_tasklet_func+0x10/0x690
[ 1023.520000] pc : [<c01a33ac>] lr : [<c01a32b8>] psr: 20000013
[ 1023.520000] sp : c7825f58 ip : 60000093 fp : 00000000
[ 1023.520000] r10: 00000006 r9 : 00000000 r8 : 0000000a
[ 1023.520000] r7 : 00000000 r6 : c7824000 r5 : c78a2484 r4 : c03c0cb8
[ 1023.520000] r3 : 0000004c r2 : 0000004c r1 : 60000013 r0 : 00000001
[ 1023.520000] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
[ 1023.520000] Control: 0005317f Table: 27b40000 DAC: 00000017
[ 1023.520000] Process ksoftirqd/0 (pid: 3, stack limit = 0xc7824270)
[ 1023.520000] Stack: (0xc7825f58 to 0xc7826000)
[ 1023.520000] 5f40: 00000001 c7824000
[ 1023.520000] 5f60: 00000100 0000000a 00000000 00000006 c7825f8c 00000000 00000001 c7824000
[ 1023.520000] 5f80: 00000100 0000000a 00000006 c0045cf8 c03b995c c00461d8 c7aa6ae0 00000000
[ 1023.520000] 5fa0: 60000093 00000000 c7824000 c0046274 00000013 00000000 00000000 c00462e0
[ 1023.520000] 5fc0: 00000000 c7819f70 00000000 c00570e0 00000000 00000000 00000000 00000000
[ 1023.520000] 5fe0: c7825fe0 c7825fe0 c7819f70 c0057060 c0030b14 c0030b14 ffffffff ffffffff
[ 1023.520000] [<c01a33ac>] (atmel_tasklet_func+0x104/0x690) from [<c0045cf8>] (tasklet_action+0x84/0xe

[ 1023.520000] [<c0045cf8>] (tasklet_action+0x84/0xe

from [<c00461d8>] (__do_softirq+0x88/0x124)
[ 1023.520000] [<c00461d8>] (__do_softirq+0x88/0x124) from [<c00462e0>] (run_ksoftirqd+0x6c/0x12

[ 1023.520000] [<c00462e0>] (run_ksoftirqd+0x6c/0x12

from [<c00570e0>] (kthread+0x80/0x8

[ 1023.520000] [<c00570e0>] (kthread+0x80/0x8

from [<c0030b14>] (kernel_thread_exit+0x0/0x

[ 1023.520000] Code: 1a000002 e59f057c e59f157c ebfa3d49 (e5973000)
[ 1023.710000] ---[ end trace 786b41cd25d3b661 ]---
[ 1023.710000] Kernel panic - not syncing: Fatal exception in interrupt
[ 1023.720000] [<c0034b10>] (unwind_backtrace+0x0/0xe0) from [<c02a8af8>] (panic+0x50/0x170)
[ 1023.720000] [<c02a8af8>] (panic+0x50/0x170) from [<c0032e00>] (die+0x184/0x1c4)
[ 1023.730000] [<c0032e00>] (die+0x184/0x1c4) from [<c0035aa8>] (__do_kernel_fault+0x64/0x84)
[ 1023.740000] [<c0035aa8>] (__do_kernel_fault+0x64/0x84) from [<c0035c7c>] (do_page_fault+0x1b4/0x1c

[ 1023.750000] [<c0035c7c>] (do_page_fault+0x1b4/0x1c

from [<c002a240>] (do_DataAbort+0x30/0x9

[ 1023.760000] [<c002a240>] (do_DataAbort+0x30/0x98) from [<c002f86c>] (__dabt_svc+0x4c/0x60)
[ 1023.770000] Exception stack(0xc7825f10 to 0xc7825f58)
[ 1023.770000] 5f00: 00000001 60000013 0000004c 0000004c
[ 1023.780000] 5f20: c03c0cb8 c78a2484 c7824000 00000000 0000000a 00000000 00000006 00000000
[ 1023.790000] 5f40: 60000093 c7825f58 c01a32b8 c01a33ac 20000013 ffffffff
[ 1023.790000] [<c002f86c>] (__dabt_svc+0x4c/0x60) from [<c01a33ac>] (atmel_tasklet_func+0x104/0x690)
[ 1023.800000] [<c01a33ac>] (atmel_tasklet_func+0x104/0x690) from [<c0045cf8>] (tasklet_action+0x84/0xe8)
[ 1023.810000] [<c0045cf8>] (tasklet_action+0x84/0xe8) from [<c00461d8>] (__do_softirq+0x88/0x124)
[ 1023.820000] [<c00461d8>] (__do_softirq+0x88/0x124) from [<c00462e0>] (run_ksoftirqd+0x6c/0x128)
[ 1023.830000] [<c00462e0>] (run_ksoftirqd+0x6c/0x128) from [<c00570e0>] (kthread+0x80/0x88)
[ 1023.840000] [<c00570e0>] (kthread+0x80/0x88) from [<c0030b14>] (kernel_thread_exit+0x0/0x8)
注意上述紅色的地方。
下面就來顯示如何定位出出錯代碼行:
1.首先，編譯時打開complie with debug info選項，步則如下
make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- menuconfig

進入 Kernel hacking

選擇 Compile the kernel with debug info
然后，保存，退出。
接著 make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi-
編譯，等編譯完成。
2.利用arm-none-linux-gnueabi-gdb 調試，如下：
arm-none-linux-gnueabi-gdb vmlinux

對應著Oops 消息里面的這一行
[ 1023.520000] LR is at atmel_tasklet_func+0x10/0x690
在gdb下鍵入命令： l *at atmel_tasklet_func+0x10

這樣就找到了出錯的代碼行。在這里鄙視一下atmel提供的內核，竟然還有bug，fuck it！
從這里可以看出是由于串口的dma導致Oops的，于是我去掉了串口的dma傳輸。方法如下：

去掉之后還沒有發現上述的Oops出現。

作者: 灌水菜鳥 時間: 2012-05-16 15:23
CROSS_COMPILE 的 objdump不行么？

作者: npuazm 時間: 2012-05-16 15:28
atmel DMA 傳輸，是什么bug？不能在fix掉嗎？
感謝樓主的share

作者: 瀚海書香 時間: 2012-05-16 15:35
回復 1# zhuqing_739
不錯，多謝分享！
串口傳輸?shù)拇_是不同需要DMA的。

作者: tempname2 時間: 2012-05-16 15:44
addr2line.

作者: tempname2 時間: 2012-05-16 15:45
最新內核么？LZ跟一跟啊，這么好一個BUG。

作者: linuxfellow 時間: 2012-05-17 09:56
回復 1# zhuqing_739
有時不一定內核代碼有問題，DMA需要用物理地址，配置是這一點一定要注意。如果再深入一步，找到DMA的問題，那么對DMA也能完全懂了。

作者: victure83 時間: 2012-05-17 14:53
不錯，學習

作者: 25641463 時間: 2012-05-18 17:32
我用的比較搓的方法，需要對反匯編看的比較熟才行。
就是把導致oops的.ko拖到 ida里，然后搜索一下oops打印的函數名+偏移，定位到匯編行，然后看一眼附近的匯編代碼，再看源碼。。。。

歡迎光臨 Chinaunix (http://www.72891.cn/)