標題: cisco交換機如何查看光模塊的信息 [打印本頁] 作者: xuxic 時間: 2011-12-30 10:48 標題: cisco交換機如何查看光模塊的信息 如何查看光模塊信息,包括波長、距離、衰減等,搜了好久,沒有找到啊,我們用的交換機是C4507
C4507#sh ver
Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500-ENTSERVICESK9-M), Version 12.2(40)SG, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Wed 07-Nov-07 18:00 by prod_rel_team
Image text-base: 0x10000000, data-base: 0x11ADF0B8
ROM: 12.2(31r)SGA3
Pod Revision 16, Force Revision 31, Tie Revision 32
GDCZ-WLAN-QQT-SWITCH02-C4507 uptime is 24 weeks, 1 day, 16 hours, 40 minutes
Uptime for this control processor is 24 weeks, 1 day, 16 hours, 37 minutes
System returned to ROM by reload
System restarted at 18:07:15 BeiJing Wed Jul 13 2011
System image file is "bootflash:cat4500-entservicesk9-mz.122-40.SG.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
If you require further assistance please contact us by sending email to export@cisco.com.
cisco WS-C4507R-E (MPC8540) processor (revision 13) with 524288K bytes of memory.
Processor board ID FOX1508H1BT
MPC8540 CPU at 800Mhz, Supervisor V-10GE
Last reset from Reload
12 Virtual Ethernet interfaces
70 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.
show inv作者: aplah 時間: 2011-12-30 11:14
show idprom intrface xx 這個也行作者: xuxic 時間: 2011-12-30 11:54
謝謝了。
C4507#show idprom int g2/6
GBIC Serial EEPROM Contents:
Common Block:
Identifier = GBIC [0x1]
Extended Id = GBIC is compliant with MOD_DEF 6 [0x6]
Connector = SC connector [0x1]
Transceiver
Type = Gbic 1000BaseLH
Speed(FC,byte 10)= Not available [0x0]
Media = Not available [0x0]
Technology = Not available [0x0]
Link Length = Not available [0x0]
GE Comp Codes = 1000BASE-LX [0x2] (LX used generically for LX, LH or ZX)
SONET Comp Codes = Not available [0x0]
Encoding = 8B10B [0x1]
BR, Nominal = 1300 Mbps (million bits per second)
Length(9u) in km = GBIC does not support single mode fibre, or the length
must be determined from the transceiver technology.
Length(9u) = 10000 m
Length(50u) = 550 m
Length(62.5u) = 550 m
Length(Copper) = GBIC does not support copper cables, or the length must
be determined from the transceiver technology.
Vendor name = CISCO-AVAGO
Vendor OUI = 5994
Vendor Part No. = SFCT-5687Z-CS1
Vendor Part Rev. = 0000
Wavelength = Not available
CC_BASE = 0x9C
Extended ID Fields
Options = Loss of Signal implemented TX_FAULT signal implemented TX_DISABLE is implemented and disables the serial output [0x1A]
BR, max = Unspecified
BR, min = Unspecified
Vendor Serial No. = AGD1441F0AR
Date code = 101020
Diag monitoring = Not implemented
Rx pwr measuremnt = Optical Modulation Amplitude (OMA)
Address change = Not required
CC_EXT = 0xBD