亚洲av成人无遮挡网站在线观看,少妇性bbb搡bbb爽爽爽,亚洲av日韩精品久久久久久,兔费看少妇性l交大片免费,无码少妇一区二区三区

<u id="wzcak"></u>

Chinaunix

標題: 驅動問題，哪位幫看看，謝謝了。：） [打印本頁]

作者: loveflag 時間: 2008-01-22 09:40
標題: 驅動問題，哪位幫看看，謝謝了。：）
硬件
主板：intel_7230-ah（入門級）服務器主板
#lspci
00:1f.2 RAID bus controller: Intel Corporation 82801GR/GH (ICH7 Family) Serial ATA Storage Controller RAID (rev 01)
官方提供的驅動只有redhat enterprise 4.0的驅動

仔細研究發現和intel——s3000主板屬于同一系列，資訊intel客服承認兩者除支持CPU型號不同外都相同。

故此發現s3000可以下到redhat enterprise 5.0的驅動
軟件
CentOS5.0
[root@test02 etc]# uname -a
Linux test02 2.6.18-8.el5 #1 SMP Thu Mar 15 19:57:35 EDT 2007 i686 i686 i386 GNU/Linux
[root@test02 etc]#
所以尋求如何來驅動raid。
我這服務器已經有系統，所以在系統上又多加了2塊160G硬盤，做RAID0，BIOS自檢時候，顯示RAID0制作成功。
但是系統無法識別。
[root@test02 etc]# fdisk -l

Disk /dev/hda: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot    Start       End    Blocks Id  System
/dev/hda1 *          1       1275 10241406 83  Linux
/dev/hda2          1276       1402    1020127+  82  Linux swap / Solaris
/dev/hda3          1403       4865 27816547+  83  Linux

Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot    Start       End    Blocks Id  System
/dev/sda1             1    19457 156288321 83  Linux

Disk /dev/sdb: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot    Start       End    Blocks Id  System
/dev/sdb1             1    19457 156288321 83  Linux

Disk /dev/md0: 320.0 GB, 320078348288 bytes
2 heads, 4 sectors/track, 78144128 cylinders
Units = cylinders of 8 * 512 = 4096 bytes

Disk /dev/md0 doesn't contain a valid partition table
[root@test02 etc]#
我安裝驅動的方法如下：
[root@test02 tmp]# ls
ESRT_RHEL5_v.5.11a_x86.tgz
[root@test02 tmp]# tar zxvf ESRT_RHEL5_v.5.11a_x86.tgz
modinfo
modules.alias
modules.cgz
modules.dep
pcitable
rhdd
[root@test02 tmp]# gunzip -S .cgz modules.cgz
[root@test02 tmp]# cpio -ivd < modules
.
2.6.18-8.el5
2.6.18-8.el5/i686
2.6.18-8.el5/i686/megaide.ko
modules.alias.megaide
333 blocks
[root@test02 tmp]# cp 2.6.18-8.el5/i686/megaide.ko /lib/modules/2.6.18-8.el5/updates/megaide.ko
cp：是否覆蓋“/lib/modules/2.6.18-8.el5/updates/megaide.ko”? yes
[root@test02 tmp]# vim /etc/modprobe.conf
"

alias acsi_hostadapter megaide
"
[root@test02 tmp]# rm -fr /boot/initrd-2.6.18-8.el5.img ; mkinitrd -v -f /boot/initrd-2.6.18-8.el5.img 2.6.18-8.el5
Creating initramfs
WARNING: using /tmp for temporary files
Looking for deps of module uhci-hcd
Looking for deps of module ohci-hcd
Looking for deps of module ehci-hcd
Looking for deps of module ext3: jbd
Looking for deps of module jbd
Found root device hda1 for LABEL=/
Looking for driver for device hda1
Looking for deps of module ide:m-disk
Looking for driver for device LABEL=SWAP-hda2
Looking for deps of module megaide
Looking for deps of module ide-disk
Using modules:  /lib/modules/2.6.18-8.el5/kernel/drivers/usb/host/uhci-hcd.ko /lib/modules/2.6.18-8.el5/kernel/drivers/usb/host/ohci-hcd.ko /lib/modules/2.6.18-8.el5/kernel/drivers/usb/host/ehci-hcd.ko /lib/modules/2.6.18-8.el5/kernel/fs/jbd/jbd.ko /lib/modules/2.6.18-8.el5/kernel/fs/ext3/ext3.ko /lib/modules/2.6.18-8.el5/updates/megaide.ko
/sbin/nash -> /tmp/initrd.Id7134/bin/nash
/sbin/insmod.static -> /tmp/initrd.Id7134/bin/insmod
copy from `/lib/modules/2.6.18-8.el5/kernel/drivers/usb/host/uhci-hcd.ko' [elf32-i386] to `/tmp/initrd.Id7134/lib/uhci-hcd.ko' [elf32-i386]
copy from `/lib/modules/2.6.18-8.el5/kernel/drivers/usb/host/ohci-hcd.ko' [elf32-i386] to `/tmp/initrd.Id7134/lib/ohci-hcd.ko' [elf32-i386]
copy from `/lib/modules/2.6.18-8.el5/kernel/drivers/usb/host/ehci-hcd.ko' [elf32-i386] to `/tmp/initrd.Id7134/lib/ehci-hcd.ko' [elf32-i386]
copy from `/lib/modules/2.6.18-8.el5/kernel/fs/jbd/jbd.ko' [elf32-i386] to `/tmp/initrd.Id7134/lib/jbd.ko' [elf32-i386]
copy from `/lib/modules/2.6.18-8.el5/kernel/fs/ext3/ext3.ko' [elf32-i386] to `/tmp/initrd.Id7134/lib/ext3.ko' [elf32-i386]
copy from `/lib/modules/2.6.18-8.el5/updates/megaide.ko' [elf32-i386] to `/tmp/initrd.Id7134/lib/megaide.ko' [elf32-i386]
Adding module uhci-hcd
Adding module ohci-hcd
Adding module ehci-hcd
Adding module jbd
Adding module ext3
Adding module megaide  #這里可以看見這個模塊

[root@test02 tmp]#
重啟后依然不行，磁盤還是兩塊，而不是raid0。

作者: jinl 時間: 2008-01-22 15:00
lsmod,查看你的驅動模塊是否加載
dmesg 看看是否有錯誤

歡迎光臨 Chinaunix (http://www.72891.cn/)