Move cursor to desired item and press Enter.
List All Network Interfaces
Add a Network Interface
Change / Show Characteristics of a Network Interface
Remove a Network Interface
PVCs for IP over an ATM Network
Configure Aliases
2。 選擇Remove a Network Interface
Move cursor to desired item and press Enter.
en0 11-08 Standard Ethernet Network Interface en1 40-58 Standard Ethernet Network Interface et0 11-08 IEEE 802.3 Ethernet Network Interface et1 40-58 IEEE 802.3 Ethernet Network Interface
3。要刪除的網卡
4。cfgmgr
5.smitty ethernet
Move cursor to desired item and press Enter.
Adapter
Services
User Applications
6.選擇Adapter
Move cursor to desired item and press Enter.
List All Ethernet Adapters
Change / Show Characteristics of an Ethernet Adapter
Generate Error Report
Trace an Ethernet Adapter
7選擇Change / Show Characteristics of an Ethernet Adapter
Move cursor to desired item and press Enter.
ent0 Available 11-08 IBM 10/100 Mbps Ethernet PCI Adapter (23100020)
ent1 Available 40-58 IBM 10/100 Mbps Ethernet PCI Adapter (23100020)
8。選擇要修改的網卡
ent0 Available 11-08 IBM 10/100 Mbps Ethernet PCI Adapter (23100020)
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
Ethernet Adapter ent0
Description IBM 10/100 Mbps Ethernet PCI Adapter (23100020)
Status Available
Location 11-08
TRANSMIT queue size [8192] +#
HARDWARE RECEIVE queue size [256] +#
RECEIVE buffer pool size [384] +#
Media Speed 10_Full_Duplex +
Inter-Packet Gap [96] +#
Enable ALTERNATE ETHERNET address no +
ALTERNATE ETHERNET address [0x000000000000] +
Enable Link Polling no +
Time interval for Link Polling [500] +#
Apply change to DATABASE only no
9選中 Media Speed 10_Full_Duplex 進行修改